Catch Can for 2006 Tahoe 5.3
- Thread starter Ultimax
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Scottydoggs
Full Access Member
S33k3r
Full Access Member
What difference have you observed it make?
strutaeng
Full Access Member
Tonyrodz
Resident Resident
A recommended mode.
Marky Dissod
Full Access Member
Yes, doesn't matter if it's a 4.8L, 5.3L, 5.7L, 6.0L, 6.2L, 6.6L, or 7.0L.
Scottydoggs
Full Access Member
you'll notice no difference. but you'll have piece of mind that that oil in the can is not laying in your intake. mine is ran right off the top of the pcv valve, so what its catching is what would end up in the intake.
dwinters14
Member
- Joined
- Apr 10, 2020
- Posts
- 78
- Reaction score
- 53
A catch-can with a good throttle body/maf cleaning might make everything feel a bit better. Especially if that PCV hose is cracked or on it's way out.
But it will definitely keep oily vapors, and ***** engine oil from getting sucked back into the intake which should keep everything clean over the long term.
But it will definitely keep oily vapors, and ***** engine oil from getting sucked back into the intake which should keep everything clean over the long term.
Joseph Garcia
Supporting Member
- Joined
- Aug 2, 2018
- Posts
- 7,328
- Reaction score
- 9,890
I installed an oil catch can on my 07, and I log about 1 fl oz of trapped oil in the catch can for every 1000 miles driven. That's 1 fl oz of dirty oil that does not get recycled through my motor's intake for every 1000 miles of traveling. That is all the evidence that I need to justify the oil catch can's installation.
S33k3r
Full Access Member
I asked the question not because I doubted anyone. I asked it, hoping an answer would demonstrate the utility. I think it is a good mod. I don't know that it is *necessary*, but I do think there is enough value to add it if you can.
