2021 Yukon - No Key Found - No Start Condition (update 11/9)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

fondupot

Member
Joined
Oct 31, 2024
Posts
96
Reaction score
128
Location
South Carolina
Hi all, new to me Yukon acting up...63,143 miles.

I had the transmission serviced this morning at my local transmission shop, basic fluid and filter job. I also had them reset the brake life monitor because the dealer I purchased from replaced the brakes but didn't reset the monitor. After picking up the truck and driving home I made one stop at the UPS store to drop off a package, it was a short drive may be 10-12 minutes.

When I got back in the truck, the cluster says NO KEY FOUND. And then to put the key in the cup holder to start vehicle. I tried that, nothing working. The fob still worked to lock/unlock the doors, but it wouldn't start the truck.

Got an Uber to take me home to get the other key fob and bring me back. Got back, the truck fired up like no problem. Drove home (about 10 minute drive).

When I went to shut the truck down I got two messages on the cluster.
1. Key Missing One Restart Allowed
2. Vehicle Will Shut Down After 1 min

Now the truck is dead again, it wont start with either FOB.

Both key fobs got fresh batteries just a few days ago, because one was saying key fob low battery when we bought the truck.

I popped the hood and disconnected the negative battery cable and I've been letting it sit for a while. I haven't tried starting it again yet.

Wanted to post here and get some input.

Much appreciated.
 
OP
OP
fondupot

fondupot

Member
Joined
Oct 31, 2024
Posts
96
Reaction score
128
Location
South Carolina
Here are the two messages I got on shut down.
 

Attachments

  • IMG_0983.jpeg
    IMG_0983.jpeg
    161.4 KB · Views: 10
  • IMG_0982.jpeg
    IMG_0982.jpeg
    154.1 KB · Views: 11

Cjamaco79

TYF Newbie
Joined
Oct 28, 2024
Posts
4
Reaction score
3
Hi all, new to me Yukon acting up...63,143 miles.

I had the transmission serviced this morning at my local transmission shop, basic fluid and filter job. I also had them reset the brake life monitor because the dealer I purchased from replaced the brakes but didn't reset the monitor. After picking up the truck and driving home I made one stop at the UPS store to drop off a package, it was a short drive may be 10-12 minutes.

When I got back in the truck, the cluster says NO KEY FOUND. And then to put the key in the cup holder to start vehicle. I tried that, nothing working. The fob still worked to lock/unlock the doors, but it wouldn't start the truck.

Got an Uber to take me home to get the other key fob and bring me back. Got back, the truck fired up like no problem. Drove home (about 10 minute drive).

When I went to shut the truck down I got two messages on the cluster.
1. Key Missing One Restart Allowed
2. Vehicle Will Shut Down After 1 min

Now the truck is dead again, it wont start with either FOB.

Both key fobs got fresh batteries just a few days ago, because one was saying key fob low battery when we bought the truck.

I popped the hood and disconnected the negative battery cable and I've been letting it sit for a while. I haven't tried starting it again yet.

Wanted to post here and get some input.

Much appreciated.
Yes I see. It. should be fine after you reconnect the car battery.
 
OP
OP
fondupot

fondupot

Member
Joined
Oct 31, 2024
Posts
96
Reaction score
128
Location
South Carolina
@Cjamaco79 any thoughts to what might have caused this?

Did the transmission shop resetting the brake life monitor maybe trip up the computer or something?
 

Cjamaco79

TYF Newbie
Joined
Oct 28, 2024
Posts
4
Reaction score
3
@Cjamaco79 any thoughts to what might have caused this?

Did the transmission shop resetting the brake life monitor maybe trip up the computer or something?
Maybe the shop disconnected a few wires with out removing the negative terminal from the battery and the computer went crazy
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,532
Reaction score
39,948
Location
Stockton, Ca.
I’ve had two trips now without issue. I’m gonna chalk it up to being a glitch. Hopefully that’s all.
just throw wrench in the glove box for the battery for "next time"
mine has a opposite issue, if you disconnect the battery it won't start, so you have to disconnect it a 2nd time. OR use a scanner to clear the security module error
seems to be some kind of module handshake issue when power is interrupted.
 
OP
OP
fondupot

fondupot

Member
Joined
Oct 31, 2024
Posts
96
Reaction score
128
Location
South Carolina
just throw wrench in the glove box for the battery for "next time"
mine has a opposite issue, if you disconnect the battery it won't start, so you have to disconnect it a 2nd time. OR use a scanner to clear the security module error
seems to be some kind of module handshake issue when power is interrupted.

Thanks. Strange for sure. I’ll keep an eye out.
 
OP
OP
fondupot

fondupot

Member
Joined
Oct 31, 2024
Posts
96
Reaction score
128
Location
South Carolina
Update

So this morning I went to start the truck. It started fine. But the dash flashed a bunch of errors.

Service Transmission
Service Transfer Case
Service Brake System
Service Traction control System
Front collision System not active
Maybe a few others idk exactly

After a few seconds they went away. And I drove to the grocery store. Everything worked and it seemed to drive just fine.

When I got to the grocery store I got the “no key found” error. And “1 restart allowed”

Luckily, I started it back up and I went home.

When I got back to my garage I pulled in. Shut down and tried to start again. I got the “no key found” error message again and to “put the key in the cup holder” message.

Still nothing. Dead as a doornail. I have the battery disconnected again right now. But I gotta figure this issue out. Because I can’t have my wife driving this thing and leave her stranded somewhere with my 6 month old daughter.

frustrated.

Any thoughts? Gotta be some sort of module.
 
OP
OP
fondupot

fondupot

Member
Joined
Oct 31, 2024
Posts
96
Reaction score
128
Location
South Carolina
Decided to replace the battery. It was the original battery from made in April 2020. Yikes.

Had the battery place test it and it came up as a bad battery. Hopefully that was all that was causing the issues.

Put a new Duracell Platinum 94R AGM in. Went in easy, fit like OEM. Started up and went for a drive. No errors on shut down. Will try a few more drives over the next few days.
 

Forum statistics

Threads
132,791
Posts
1,874,305
Members
97,632
Latest member
MrTibbs

Latest posts

Top