HOW TO - Front & Rear Differential Fluid Change (2021+ Yukon/Tahoe/Suburban)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

fondupot

Member
Joined
Oct 31, 2024
Posts
93
Reaction score
125
Location
South Carolina
So this new to me Yukon had the dreaded rear diff groan. Did some research and with the help of @Cjamaco79 got some fluid ordered up and tackled the rear differential fluid change myself. Not to bad of a job, can be done in about 20 minutes.

Many of you know the G86 mechanical locking differentials have a TSB that the dealer can perform and if within warranty its free. But if you're out of warranty, they'll charge you an arm and a leg. The fluid is not that expensive, it can be had for less than $100.

Here is my first technical/how to contribution to the forum, hope it helps someone.


EDIT 11/29/2024

Here is the front diff fluid change video:

 
Last edited:

jerry455

TYF Newbie
Joined
May 19, 2024
Posts
26
Reaction score
17
I wish the front was that easy. It took me a couple of hours, mostly scraping the gasket, to do the front axle.
 
OP
OP
fondupot

fondupot

Member
Joined
Oct 31, 2024
Posts
93
Reaction score
125
Location
South Carolina
I wish the front was that easy. It took me a couple of hours, mostly scraping the gasket, to do the front axle.

Yea, front is def more tough. I am going to do mine soon, probably just gonna siphon out the old fluid tho, instead of removing the pumpkin cover.
 

blondie70

Full Access Member
Joined
Nov 21, 2023
Posts
273
Reaction score
428
That's what I did...siphon the old oil out...making sure to get the stuff out from the very bottom (had to make a copper tubing piece hooked to the hose),,,,easier to do that way.
 
OP
OP
fondupot

fondupot

Member
Joined
Oct 31, 2024
Posts
93
Reaction score
125
Location
South Carolina
That's what I did...siphon the old oil out...making sure to get the stuff out from the very bottom (had to make a copper tubing piece hooked to the hose),,,,easier to do that way.

I did my front diff last weekend. Siphoned the fluid out as expected, didn't go to bad. I build a service ramp to get under the truck. made things easier. I used my OMT pump to fill the front diff up with 1.14 quarts it calls for, it comes with a variety of attachments with different fill applications. I spilled a little fluid filling because the hook on the attachment I chose wasn't quite long enough, Live and learn for next time. I checked the level with a bent over zip-tie as a makeshift dipstick. Worked pretty good. I should have a video up in a week or so on that, I'll edit this thread to include that one as well.
 

jerry455

TYF Newbie
Joined
May 19, 2024
Posts
26
Reaction score
17
I like using Amsoil because of their ingenious bag design for holding the lube. Just squeeze the bag and it goes in. What a great idea. Super easy. I have switched all of my vehicles over to it.
 

Forum statistics

Threads
132,726
Posts
1,873,242
Members
97,556
Latest member
gy_psi
Top