the 18th letter
Full Access Member
Got my 2 year inspection done today. I’m good until 26 now and eligible for historic plates next registration in 25.
What did you do to your OBS GMT400 Tahoe/Yukon Today?
- Thread starter 96ProCompTahoe
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Mean_Green
Full Access Member
- Joined
- Mar 23, 2023
- Posts
- 415
- Reaction score
- 542
Check your rules. I can get Historic plates, but that means I couldn't drive it daily. Only parades and special events, or for service.
the 18th letter
Full Access Member
I was just hoping I could skip inspections with them but will definitely research this further lol
the 18th letter
Full Access Member
Blower motor stopped working yesterday after making noises for last 2-3 winters where it sounded like a leaf was stuck in the blades. No a/c due to evaporation leak so I don’t use fan much in summer. Think it’s time to take the dash out. I got various dash lights out or dim as well. I’m on vacation the coming week so I’ll see. Can it be replaced without pulling the dash. I’d like to wait until it’s warm
Last edited:
the 18th letter
Full Access Member
Fired up the parts cannon and Swapped in a new fan blower motor. Nothing lol 
busted up the knuckles a bit and pulled the resistor to swap out tomorrow smh. Thankfully I didn’t need to pull the dash. It got cold today after I started working.
busted up the knuckles a bit and pulled the resistor to swap out tomorrow smh. Thankfully I didn’t need to pull the dash. It got cold today after I started working.
Last edited by a moderator:
the 18th letter
Full Access Member
New resistor worked for a second then stopped. I suspect the control switch and will reload the parts cannon and shoot again 
New resistor worked for a second then stopped. I suspect the control switch and will reload the parts cannon and shoot again
Blown fuse?
the 18th letter
Full Access Member
I checked and cleaned the big 50A in the engine bay as well as switched relays and she still started so I ruled those 2 things out. Couldn’t find an interior fuse for the blower, did I miss one.
east302
Full Access Member
Here’s the wiring diagram, maybe it’ll help…
Mean_Green
Full Access Member
- Joined
- Mar 23, 2023
- Posts
- 415
- Reaction score
- 542
Had to use 4WD for the first time ever. Making a three point turn around, I backed into a soft spot. 2WD wasn't doin'; nuthin' but spinnin'.
Pushed the 4WLo button and extended the front claws. Pulled right out.
Pushed the 4WLo button and extended the front claws. Pulled right out.
Similar threads
