I have (another) coolant leak I'm tackling. After rinsing the underside from all the coolant sprayed everywhere, I tracked down the leak from the area in the image attached. Everything above that point is dry. Is this leak a symptom of a cracked head or possibly an intake manifold gasket? Any...
Gosh, I just went back out and pressurized back up to 15PSI (It was at 5PSI after leaving it pressurized for a couple hours), and noticed the other heater hose tee (black) is leaking too. I knew I should of ordered both and replaced them at same time. Will order up this black tee OEM and report...
Alright so I rented a pressure test for the cooling system and bought a mirror, was able to see it was in fact the crossover plug on the rear driver side of the engine. I already had gaskets from doing this previously on the front, so I put a new gasket on and re-tested after cleaning things up...
@strutaeng Awesome, very helpful. I'm going to run and buy an inspection mirror so I can try and get a better look.
@Fless I just recently put new gaskets on the crossover at the front and am not seeing any leaking there (is there one on the back?)
Your truck runs okay? No overheating, rough idle or gurgling on the coolant tank?
Yes runs fine, have not noticed anything out of the ordinary.
Was that you that created the recent thread about a leaking thermostat housing? Maybe I'm getting confused with that thread?
Yes that was me. I have...
I do have dye in the coolant, which in my second video of OP shows where it's dripping from, but that's about how far up I can see.
Would a head gasket combustion leak test kit work? If not I can try and rent a pressurized tester
@treehan77 Yeah that's what I replaced two days ago. It was leaking there on the white T, but after fixing that, and confirming that area has stayed dry, is when I started looking it this further. The white Tee was visibly leaking (I could see it drip every 10 sec or so), so I did not bother to...
Certainly hasn't overheated. Yes it's leaking quite a bit, I have been driving it and no noticeable issues besides I have been topping off coolant regularly. Been a good two weeks this has been leaking, thought it was the heater tee which was leaking, after repairing that last night the leak...
I've got *another* coolant leak pop up recently, this one coming from the back of the engine bay, down along the driver side of the oil pan. It's leaking pretty good, but I am not positive where it is coming from. I checked the back of the engine bay near the oil pressure sending unit and it...
I'm going to pull it and put a new gasket on with some ultra black see if that does the trick. I recall looking up the torque specs I'm almost positive I torqued it to spec
I recently replaced my thermostat and housing using the following part:
https://a.co/d/09bF48V
I did not use any sealant / RTV and I have a small leak now. Would it be OK to take it off, add RTV, and reassemble or does the inside gasket need replacing now?
I have an antifreeze leak coming from a pipe that runs under the accumulator, however I don't know what it's called and am looking for a part number.
Video of said leak:
If anyone can steer me in the right direction it would be greatly appreciated, thanks in advanced
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.