Search results

  1. J

    My 2001 tahoe 300k miles original engine/transmision

    Many thanks for this forum and member contributions, certainly has educated me... I've an 08 Tahoe with 240k, orig engine and tran (changed the fluids more often than spec)... I thought I was good about wear items but had totally ignored the rear control arms - what a mistake, and what an...
  2. J

    08 'Hoe w/ low oil pressure

    Thank you A_O... the bulletin has not been performed nor have I ever replaced the sender and screen... the vehicle consumes (burns) about 1/2 to 1 qt of oil between changes. I gravitated to the lifter tick being oil pressure related from its behavior... noisy and then quiet in 15-20 seconds...
  3. J

    08 'Hoe w/ low oil pressure

    Much experience and wisdom has been shared on this topic so no rehash here, more a stream of unconsciousness. Vehicle is an '08 Tahoe 5.3L 4WD with AFM @ 204k miles and it's issued a second 'low oil pressure' DIC warning. Both happened at cold start, in an unheated garage, but now the one lifter...
  4. J

    Where do I find information on my 2015 Yukon Denali

    my thanks to TollKeeper and 17 Yukon Denali - did all 4 corners w/ Arnott's 'magnetic fluid' products and after about 2000 miles they softened up nicely and the ride is restored for reasonable money. Two places I erred... - the rears are way easier if you hang the shock from the top bolt...
  5. J

    Where do I find information on my 2015 Yukon Denali

    many thx for the info - ordered them after reading your response, arrive midday today. the question - is (blue) Loctite ever advised for the bolts/threads I'll have access to?
  6. J

    Where do I find information on my 2015 Yukon Denali

    Did you perform the install? If so, any expert skills required? And sort of related, did you also replace the rear springs (I have an 08 w/ 200k, so am planning on doing this with the Arnotts). any help appreciated...
  7. J

    Happy with Arnott Eibach kit ?

    Hi all... long time reader, first post, really do value the experience and information shared here... many thanks. My question - if you installed Arnott's C-3184 shock kit (w/ Eibachs), are you satisfied enough that you'd do it again? Maybe a little on why? And what did you do for front...
  8. J

    Happy w/ the Arnott C-3184 kit?

    you are correct... a couple generations new question moved (and thank you)
  9. J

    Happy w/ the Arnott C-3184 kit?

    Hi all... long time reader, first post, really do value the experience and information shared here... thank you. My question - if you installed Arnott's C-3184 shock kit (w/ Eibachs), are you satisfied enough that you'd do it again? If so, best characteristics? And what did you do for front...

Forum statistics

Threads
132,193
Posts
1,863,717
Members
96,703
Latest member
TLS3

Latest posts

Top