Search results

  1. tom q

    Desperate Idle Problem

    now I am getting p0300 random misfire. I bought a Bluetooth obd2 connector paired with a torque app so I get a freeze frame: Fuel Status = 0 byte Engine Load = 4.706 % Engine Coolant Temperature = 183.2 °F Fuel Trim Bank 1 Short Term = 0 % Fuel Trim Bank 1 Long Term = 11.719 % Fuel Trim Bank 2...
  2. tom q

    Desperate Idle Problem

    Did the suggestions above but the car still shakes at idle. Blinking CEL is now more frequent. I removed the TB and cleaned it with a toothbrush but I was careful not to open the butterfly. Switched coils and plugs, still the same. I sprayed the intake with a carb cleaner on idle to see if...
  3. tom q

    Desperate Idle Problem

    I replaced the plugs and wires with the original..still the same. I hear a ticking sound coming from the back. Could that be a bad fuel pump? How do check for data while idle? Upon acceleration, my CEL would blink (misfiring) especially when the road is uneven. The plug on cylinder 6 is...
  4. tom q

    Who has the highest miles thread.

    04 Tahoe 227K miles.
  5. tom q

    Desperate Idle Problem

    After replacing my plugs and wires, my idle became rough at 500 rpm down to stall and got code P060 (misfire cylinder 6). Did a search and cleaned my throttle body. I removed the TB and sure it was dirty. RPM went up to 600 and no more stalling but still rough that causes the car to shudder...
  6. tom q

    Mileage Thread (00-06)

    04 Tahoe 195K
  7. tom q

    Feels like my differential will fall off!!!!

    When I go over a speed bump, I feel like my diff will fall off. Sounds like the shocks are loose, or the whole diff is loose. I checked underneath and everything is ok. Upon closer look under, sounds like its coming from the tranny. I had my tranny rebuilt a year ago. The same happens...
  8. tom q

    Air mix blend actuator

    So I am getting a good roast while I'm driving on top of the 100 degree temp here in the Central Valley (CA). Where did you guys buy the driver side actuator GM # 89018365 or 1572971? I've read the threads on replacing. Looks like an easy DIY. I just need to know where to buy. Dealer...
  9. tom q

    Air mix blend actuator

    So I am getting a good roast while I'm driving on top of the 100 degree temp here in the Central Valley (CA). Where did you guys buy the driver side actuator GM # 89018365 or 1572971? I've read the threads on replacing. Looks like an easy DIY. I just need to know where to buy. Dealer...
  10. tom q

    Replacing factory door speaker questions

    I have a bose system. Installed a sony 4 way speaker in front 4 ohms. Have no problems with it. Replacing door speakers scale: 3... depends on you though. I think you remove 2 screws for the panel. Lift the panel up to unhook it from the door. remove the wire connectors and there you go...
  11. tom q

    Alarm and Remote Start

    can you install a DEI smartstart module to any alarm? I have an autopage RS 730 ---------- Post added at 11:13 AM ---------- Previous post was at 11:09 AM ---------- I installed my autopage and did not cut the starter wires. In other words, my alarm does not do the engine kill. But since I...
  12. tom q

    crying and coughing out $ 2500 for tranny

    I saw the sprags, solenoids, etc. They were bent and burned. For the first time in many years, I can now feel my overdrive kick in. Feels like a 5th gear. Corvette servo was a good decision thanks to the other members' suggestions. At 150K miles, I think the tranny served its life.
  13. tom q

    crying and coughing out $ 2500 for tranny

    Got the Hoe last night......$ 1370 out the door with a corvette servo. So far so good. Servo felt different. Longer 1st and 2nd and firmer. I was lucky enough to drop by the shop when they were bench building my tranny. I saw all the parts, parts that were burnt and worn out. It was...
  14. tom q

    crying and coughing out $ 2500 for tranny

    thanks guys. Hoe is in the shop today. I'm waiting for the quote. I told the guy I also wanted a corvette servo installed.
  15. tom q

    crying and coughing out $ 2500 for tranny

    what does it do performance wise?
  16. tom q

    crying and coughing out $ 2500 for tranny

    I found another tranny company that will rebuild it for $1300, with same "upgrades" - changing the plastic caps to aluminum. Warranty is 1 year. What do you guys think?
  17. tom q

    crying and coughing out $ 2500 for tranny

    2 other shops quoted the same price. I will call another one just to compare. Anybody from the central valley, CA who can recommend a shop?
  18. tom q

    crying and coughing out $ 2500 for tranny

    just to clarify, this is a rebuild with "upgrades" (not sure what they're upgrading) with a 3 year warranty. According to AAMCO, they will use different materials.
  19. tom q

    crying and coughing out $ 2500 for tranny

    My tranny started slipping 3rd and 4th and then yesterday refused to shift to 3rd and 4th on the freeway. Had to travel 15 miles more on 2nd gear to get home. AAMCO's quote (over the phone) is about $ 2500 for rebuild. 3 other companies quoted almost the same price considering I have 150K...
  20. tom q

    Blizzardx23's Pick-n-Pull thread

    left fog lamps PLEASE. The glass broke and the reflector piece melted. Blizzard I'm in Modesto. Where do you get the parts? I could probably go there one weekend. ---------- Post added at 12:23 PM ---------- Previous post was at 11:44 AM ---------- Oh and the rear radio controls...
  21. tom q

    fog light mod..??HID

    I have 35W 3000K (yellow) in my fogs. Unfortunately, the bottom reflector of the fog melted. I have to buy a pair of fogs (04 Tahoe). I like the yellow lights for fogs coz it blends well with my 55W 6000K lows and highs
  22. tom q

    GMDLBP Programming issues

    done. I reset it back using mode 7 and then I was able to change the platform. Thanks for the help.
  23. tom q

    Recirculate Air

    thanks
  24. tom q

    GMDLBP Programming issues

    I followed the manual but I could not change the platform. I can program the door locks, etc. but not the platform type.
  25. tom q

    Recirculate Air

    wow where di dyou get this info. I've been searching everywhere and found different names for this part: 1. Recirculating door 2. Air damper door 3. Air inlet etc.... where there pics?

Forum statistics

Threads
132,266
Posts
1,865,040
Members
96,829
Latest member
Stanlee83

Latest posts

Top