Search results

  1. mikez71

    Wiper hose parts....what the???

    Only way I can do it is bending the tabs on the wiper arm they are mounted to. Gently with pliers.. I'm longing for some hood mount squirters..
  2. mikez71

    Never seen this before - Parking Brake Shoe Replacement Help

    Could be. Try swapping rotors if possible. I have purchased some parts store brake pads that were just too thick. Went to another store, material was thinner, everything worked fine. I know you got the Delco pads, but maybe the rotors were changed before and one was out of spec?
  3. mikez71

    2014 tahoe dome light does not turn on with driver side door open

    Most likely, if your door module is bad, you will need a new module. But it sounds like it's your driver door latch that may not be sending a signal that the door is open. (The door ajar & door open switches in the diagram above) Looking at this thread...
  4. mikez71

    Is This A PPV, An SSV, or What?

    Pictures! I demand pictures!
  5. mikez71

    2012 Yukon XL Denali - ignition power source

    l Great info Doubeleive! I knew I shouldn't respond to Denali/Escalade question...
  6. mikez71

    '12, '15, '17 Tahoe 6l80 3.08 shift schedule comparisons.

    The 2017 map revs a little high in places before shifting.. Hangs a bit. Low end and top end. The 2.5mph increase before WOT 1-2 shift and 2mph increase before WOT 2-3 shift feels too much. Interestingly, WOT 3-4 shift is about 3mph lower than the original tune. (Haven't gone that fast yet...
  7. mikez71

    HP Tuners additional changes?

    FWIW, I Have been reading that people prefer to adjust the 'TORQUE ADDER' table, which sets target shift times which can tighten up a shift, more than they like to remove torque management. Supposedly the torque adder tables came out after the torque management settings were available...
  8. mikez71

    2021 PPV Front Brakes on 2013 Escalade ESV, and rear brake overhaul

    How about '21+ knucks and arms..? In another thread someone got the wrong lower arm, supposedly a 15-20 tahoe lower arm.. https://www.tahoeyukonforum.com/threads/aluminum-xfe-nnbs-front-suspension-rebuild.146131/post-1915874
  9. mikez71

    07 tahoe 5.3 voltage randomly dropping

    Yep, search for "RVC" or Regulated Voltage Control. (not Rear Vision Camera!) Have heard of people disconnecting the current sensor around your battery negative cable for more stable voltage.
  10. mikez71

    DOD delete low oil pressure beat!

    Lotsa work done for a 2 post-er! No questions yet, just need pics!
  11. mikez71

    2012 Yukon XL Denali - ignition power source

    Okay, you want accessory or ignition power, I see that now.. Well. there is probably an easier way... (Doubeleive's mirror tap or the $30 ebay connnector!) Worst case, there is some power at the left i/p junction block underside Ignition voltage might be better, 'Accessory' is...
  12. mikez71

    Aluminum / XFE NNBS Front Suspension Rebuild

    Looking at Marky D's post...looks like you may need the steel lower arms (If you go 14-18 parts) I have been wondering if a complete later model swap will work (knuckles/arms/tie rod ends)
  13. mikez71

    2012 Yukon XL Denali - ignition power source

    https://www.ebay.com/itm/204267481021 Seems like a lot (all?) of the driver side fuses should be hot..? Could also be the power adapter for your dashcam is set to only come on when voltage is higher?
  14. mikez71

    2021 PPV Front Brakes on 2013 Escalade ESV, and rear brake overhaul

    I wonder if newer model knuckles will bolt up, eliminating the need for grinding and centering washers. ?
  15. mikez71

    Aluminum / XFE NNBS Front Suspension Rebuild

    Which lower is that? I thought all lower arms fit all knuckles?
  16. mikez71

    2012 Yukon XL Denali - ignition power source

    I like using this plug, though it is $30 you could totally save, it also has a batt +, ground, and retained accessory power wire.. https://www.ebay.com/itm/285977677889
  17. mikez71

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    I swear thats the same exact position last time she fell asleep and you posted a pic!
  18. mikez71

    Gas Cap Question

  19. mikez71

    Whining alternator driving me crazy, tried everything

    2018? I dunno how that popped up.. now I wish I knew what happened.
  20. mikez71

    Whining alternator driving me crazy, tried everything

    I would try a third alternator !
  21. mikez71

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    I am guessing that a certain percentage of ethanol doesn't guarantee the same octane rating (depending what they mix it with?).. That said, I thought our 5.3's could drink just about anything?
  22. mikez71

    2011 Tahoe lt 5.3 waterpump replacement - SOLVED

    under an hour! dang I was gonna say 2 hours.. When I purchased a GM belt, it came with this tool.. https://www.ebay.com/itm/285989274912 I know I overtorqued my waterpump. NOT saying you should, but that waterpump seemed heavy to be hanging off those long bolts at a measly 22lbs.. I didn't...
  23. mikez71

    Baffling Oil Leak

    Dangit probably my leak as well.. and my oil pan was looking extra oily last time I looked under there..
  24. mikez71

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Totally agree on the sleeping thing! Though I've never had to, but I tested it when I first got the truck. Didn't seem possible. I hope it works out for you. It looks fairly flat and level with the seatback so there's hope...
  25. mikez71

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Yup, I'm running it mid position, definately more space, feels great for me. I might only use the reclined position if seat is fully reclined, it feels pretty far back to me.. You need more space? (I have mine all the way down, 5'-9ish, I notice you had yours up pretty far?)

Forum statistics

Threads
132,297
Posts
1,865,530
Members
96,880
Latest member
jvanwanz

Latest posts

Top