Search results

  1. randeez

    Rear-end swap: 8.6" 10 bolt w/3.08 >> 9.5" 14 bolt w/3.42 + 3.42 swap in 8.25" front (or else)

    sort of... 2010+ 2500hd axle pretty much bolts in. wouldnt call it a direct swap though :emotions122:
  2. randeez

    Let's see some pics of some lifted and leveled

    How'd you guys with cognito arms bolt on the balljoints? Mine came with 5/16 hardware, the UCA is only slightly bigger, but the balljoint has a 3/8 holes and the 5/16 hardware just swims around in there pretty loose. I don't trust the clamping force of the hardware to keep that balljoint from...
  3. randeez

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Well yea, if it's hot out you put down all the windows and it makes it easier :cheers:
  4. randeez

    10 bolt to 14 Bolt, 9.5 sf swap

    All good, as long as the parts are cheap I don't mind giving it a try. I used circle d for most of the converters. Has been swapped a few times, With different transmissions. Ended up with a big boy circle d triple disc, mechanical diode, billet cover, 252mm I think . I've been happy with them
  5. randeez

    Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)

    Day dreaming about putting this up for sale, sooooo bad decision of the day...adding up roughly how much money i have dumped into this assuming a 2012 denali with 110k miles, doesnt include any labor, any of the crap i bought that didnt work, extra transfer cases, brand new oem parts (water...
  6. randeez

    Let's see some pics of some lifted and leveled

    skid plate does look much better
  7. randeez

    Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)

    muscle memory
  8. randeez

    Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)

    i use my truck...sorry
  9. randeez

    Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)

    nothing worse than needing it, pushing that button and just having it blink at you :nolol:
  10. randeez

    Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)

    Stock engine bay, you've all seen one
  11. randeez

    Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)

    Just catching up on pictures Bump steer kit, hydroboost to gmt900 rack, 20an radiator to water pump, stock accessories yadda yadda
  12. randeez

    Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)

    alrighty. np261hd is back in, hole is cut in the floor for the transfercase shifter. i need to rip out half the interior to get the console out apparently to mount to floor shifter, it should all hide under the console and carpet though so not much worry it making it look pretty. I also put in...
  13. randeez

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    without the compressor running they should have the same pressure :shrug: jus givin ya a hard time, but yea without the compressor running both will have about the same after it sits a while 70-80psi depending on ambient temp. more than the low side would having running but def dont try...
  14. randeez

    Can you install a 2 speed transfer case in to a vehicle with a single speed?

    6l90 uses a 29 spline input iirc, 6l80 uses a 32. theres a write up on gmt900 site iirc..its a whole bunch of harnesses the transfer case also tells the front center axle disconnect to engage/disengage and wants feedback confirmation. the front awd axle doesnt have CAD
  15. randeez

    Cast iron UCA versus aluminum UCA ball joint tapers

    could also just mean the top mount is thicker on the aluminum and it carries the same taper further, making it wider? i swapped 2015ish aluminum uca/lca/spindles for a while...the spindles are out cause of lift kit. i always heard the ball joint and tie rod ends were different, tie rod ends i...
  16. randeez

    Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)

    i am happy with them, the longer spacer i ordered lines up perfect with the ones that came with it. i tried to find an ARP stainless bolt to use but could only find up to 1/2" :(
  17. randeez

    Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)

    Longer bolts (6&6.5)and spacer came, waiting on smaller "alignment spacers" for the heims, the ones i have are a little bit over 1/2" long, i ordered some that looked stubby as hell, but they are basically the same length. the only definitive shorter ones i could find that will work are 3/8 from...
  18. randeez

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    30 for $14 and ill throw another 30 in absolutely free
  19. randeez

    Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)

    alright so the end goal here is to flatten out the tie rod angles or even have them slightly above level, that way while accelerating if it goes from slightly above to below the net length stays close enough not to make a huge difference. There are several ways to do this, im looking at three...
  20. randeez

    Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)

    May as well add to the build thread since this is becoming a ta-do. Bump steer kit, with the 6"+ lift (more like 7.5-8 with coilovers) tie rod ends are already angled down, accelerating brings the front end up, angling them down even more, angle=shorten=tires turn in.
  21. randeez

    Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)

    yea i was looking at cutting it all off, then the snowball of moving the idler, longer bolt, longer belt... kinda just want to get it back together. using the truck pump isnt a big deal
  22. randeez

    Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)

    It's like right there but doesn't work, and I wouldn't been able to put an idle pulley right there next to the hose outlet
  23. randeez

    Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)

    let me 2x check to make sure its never had coolant in it ACDELCO 251713 (251-713) Water Pump pretty sure i bought it last time i was planning on going back to belt driven accessories and never used it @iamdub camaro pump doesnt work with truck accessory bracket...going to have to use the...
  24. randeez

    Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)

    ctsv made it back to the house, so far so good. work order for new converter, new (correct) fluid mobil1 blue label with a gm part number, new filter, anddd one more thing i dont remember what it was prob not important. i dont remember exactly how many miles it had when i dropped it off but its...
  25. randeez

    Fosscore's 2013 Suburban LTZ Build Thread

    All you swapped was the front coilovers right? Sneak some spindles and drop springs on it

Forum statistics

Threads
132,301
Posts
1,865,642
Members
96,885
Latest member
BinOdhaib

Latest posts

Top