I have a 2010 and i do traffic direction for our town. i can leave my truck off with all my led warning lights on and only us my car starter every now and then when i remember and all the other guys half to have there's running all the time.
If you want hardlines dorman has a kit on rockauto. Or i got some rubber lines from https://www.autocoolingsolutions.com they have full line sets patch kits and block off kits. And mine leaked at the same spot last mount before rear axle.
I am getting a pioneer avh 4200nex and i was wondering if anyone has a Maestro RR on there radio what obd2 gauges you can get. im deciding should i get the one that just does the wheel buttons ($50) or the rr that does everything ($170) and no i dont have the bose amp.
Yes i had that problem the bumper bracket were c Chanel so when they bolted it in it bent it in a little bit. So just take a baby bfh and open up the opening then tap it in the rest of the way
Auto Cooling Solutions also has block off kits. i got mine for $40 or 50 if your system is empty it takes 10 min to remove hoses and put caps on. then have it recharged.
here is what the manual says
6J4 WIRING - HORN/SIREN CIRCUIT
Two 16 gauge wires are connected to an in-line connector in the horn
circuit of the instrument panel harness under the instrument panel. The
end of this harness extension is terminated with an in-line connector in a
60 inch coil...
I tested the lamps, the wiring and tested both sides of the reverse fuse and read some forum posts then got a junk yard fuse panel and installed it and the lights worked.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.