Looks. Awesome thank you. Did you weld the rear bumper brackets on it just bolt them. I pull a trailer sometimes and I worry about the strength after the body lift. I have the stock tow package. Angles look alright, are those the rough country upper arms? How are they holding up
I did this to mine and every other one that gets fixed permenitly does to. Takes 10-15 seconds of lightly applying heat. It's a fine point and there is no need to heat the glass. The wet towel prevents the glass from getting hot. Glass was no hotter after than when started. If it has pulled the...
Pull the cables down and wrap them around the base of the shock to stretch them out or hang something heavy off them. Wrap thin solder around the tab 5x6 times. With the hatch open Put a wet rag on the glass behind where the tab goes. Clamp vise grips to the connector part of the tab. Holding...
So I ordered this off amazon and this is what showed up. ordered it yesterday at 12:45pm and it was on my doorstep by 6pm tonight. Shipping said I'd have it next wed so I'm super impressed, it beat the gaskets here. I saw it on the steps and it's so ugly I wanted to hit it with a stick and tell...
So I ordered this off amazon and this is what showed up. ordered it yesterday at 12:45pm and it was on my doorstep by 6pm tonight. Shipping said I'd have it next wed so I'm super impressed, it beat the gaskets here. I saw it on the steps and it's so ugly I wanted to hit it with a stick and tell...
Since it's straight the Upper house is a little closer to the tensioner than I would like but it won't hit. I was thinking of heating the pipe and putting a slight bend in it but it's good for now. I also tried routing the hose over the tube and it clears the hood but it looked funny.
I know and nowhere does it say who makes the lights. Says you think blue is the best accessory light color, but not who makes them. I said I stopped at ove 4 because the first link was to page one of like 30 pages
Look big lol. How it look from the side and back? Can you see the frame under the running boards and how's the rear bumper. I have been looking at a 2" body lift, how do you trust the rear bumper lift and pulling a trailer.
What arms are you guys using. I'm thinking of going with rough country but possibly the cognito. If anyone has pics comparing them or any other brands to stock please post them. I'm trying to see if and how much the balljoint is compared to stock and if there is a difference on the drop/bend to...
What do you have. Any pics or info would be useful. Trucks not for off road Led light strips will be fine. I have $21 18" auto zone ones on my super moto and they hold up fine to mud and water.
figured there is no point in buying one when I can just make one. Got some left over 4" pvc drainage pipe and 2 silicone couplers off amazon. 4" 90* and a 4" to 3.5". Cost about 25 for the pair. I used the stock clamps and drilled a 1/2 inch hole in the tube for the pcv valve. ( I will be...
you can run 50 gallons of fluid through it but the filter will still be old. I'd drop the pan change the filter. The old shit will be stuck in the old filter. Old fluid will not clog up a new filter. If it's that bad you have bigger problems. You can put the return line in a5 gallon bucket and...
I'm planning on adding a body lift to my current and soon to be added to setup. I had a 2" on my old 1990 2500 I hated how much frame showed. I figure the running boards will hide the frame, but I think a 3" will still show frame and not look good. I'd like as much height as I can get without...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.