Search results

  1. 01Konvict

    Show off your 2015+ leveled Tahoes and Yukons!

    +12 will be flush for sure
  2. 01Konvict

    Rocket Man's 2008 Bagged CC Silverado Build AKA "THE MACHINE"

    Looks good and cut off seems crisp for MH1. Not sure what the flare up in right hand corner of picture is from... The gap between steps at 25' should equal gap between center of each projector. So centerline of projector to projector is 55" then at 25' the step peaks need to be 55" apart...
  3. 01Konvict

    Rocket Man's 2008 Bagged CC Silverado Build AKA "THE MACHINE"

    One step even on both sides, meaning the step up on driver side matches step up on passenger. So as you have them now is correct. The point of the step up is to project light further down the road while not blinding oncoming drivers to your left. That's why they make LHD and RHD steps...
  4. 01Konvict

    2016 Yukon Denali

    I don't think those wheels will stick out 3" from fenders, that's more of a x12 -44 wheel. Also make your own lift kit from companies instead of 6" kit. I would get a 4" CST front kit, rough country rear shock brackets from their 3.5" kit, ebay 2" coil spacers, FTS ride height rod extensions...
  5. 01Konvict

    2000 NBS Blue Steel Burban Build

    That should even rear out for lift and those 5165s will look great!
  6. 01Konvict

    Rocket Man's 2008 Bagged CC Silverado Build AKA "THE MACHINE"

    Glad you found the issue. I knew something had happened to get the bag to pop. Enjoy daily driving it until the denali is back.
  7. 01Konvict

    Advice on rust + install found on 2010 Tahoe underside

    I do like the way that hoe sits with chrome BMFs! Shame they wont drop the price and make a deal for it. It would take some money to correct it back to a clean format for me.
  8. 01Konvict

    Rocket Man's 2008 Bagged CC Silverado Build AKA "THE MACHINE"

    That sucks! Hope it didn't drag the bumper and front end too much laid out until you got it stopped. I'm with @yates ™ it had to rub or have a weak spot from something. My buddies air truck still hasn't blown a bag and its 13 years old now.
  9. 01Konvict

    Rocket Man's 2008 Bagged CC Silverado Build AKA "THE MACHINE"

    Maybe things are different with the mini gatling compared to my FXRs but the shrouds used to slide on and grip over the part that holds the lens. You would put epoxy on that edge beside glass lens so the shroud doesn't come off. Either way if you secured with screws then its fine. You will...
  10. 01Konvict

    Rocket Man's 2008 Bagged CC Silverado Build AKA "THE MACHINE"

    Need more flicker!!! I drool watching my FXRs hit signs and truck tailgates! The shroud tabs where it holds onto the projector need a little epoxy so they stay on for good.
  11. 01Konvict

    2007-2014 BlackFlame Customs Yukon Denali Retrofit

    Delete amber strip
  12. 01Konvict

    Show off your 2015+ leveled Tahoes and Yukons!

    Yeah I'm leaning towards the 33 at2 or terra for the next build but in 22s on 4" CST. The exo isn't bad and I tried R/T too but after some wear it starts to pick up on the rear fenders in the cabin. Plus I don't want the extra weight too.
  13. 01Konvict

    Show off your 2015+ leveled Tahoes and Yukons!

    Haha nice I knew it was close. Good tire choice by the way. How does the road noise sound over the rear fender wells? I have nitto exo and they aren't too bad but doubt I will ever go full m/t but maybe ridge or r/t. The sways are huge improvement on these platforms. The trucks with leafs...
  14. 01Konvict

    Advice on rust + install found on 2010 Tahoe underside

    They are too high in my opinion. I would ask some over for mine but the entire undercarriage is rust free and clean powder black on most parts. Yes that has coilovers but they need a full rebuild and all of it needs stripped/painted. Wheels are pitted but tires seem decent tread. I would...
  15. 01Konvict

    Let's see some pics of some lifted and leveled

    It looks good just need some new headlights. What size tires? Could you share pics of the trimmed areas?
  16. 01Konvict

    Show off your 2015+ leveled Tahoes and Yukons!

    Z71 Hoe looks great!!!! I'm guessing 20x10 wheels on 35x12.50? It needs 1.5" rear wheel spacers to even track width with front. This helps with the roll feel. Also every lifted hoe/kon needs at least hellwig or eibach rear sways but the fronts help too. Keeps it much more planted feeling.
  17. 01Konvict

    Lifted guys, did anyone have vibrations/bufeting prior to lift but now it's fixed?

    Only in 4wd might you get a vibration at highway speeds. If so drop in a dual cardan driveshaft to eliminate it.
  18. 01Konvict

    Rocket Man's 2008 Bagged CC Silverado Build AKA "THE MACHINE"

    I like the plans for the lights and agree with painting the strips. Not sure if painting of the headlight bowl outside edge near turn signal or not. I need to see a shroud in front of it with painted marker section. The morimoto switchbacks should give the correct glow and demon eyes sounds...
  19. 01Konvict

    Rocket Man's 2008 Bagged CC Silverado Build AKA "THE MACHINE"

    Yes no strips or anything as such! I don't even like switchback turn/parking bulbs because I have yet to see a proper glow from an LED switchback in a bulb bowl. I do like the morimoto led bulds and sylvania zevo in a standard bulb bowl. I have the zevo as reverse bulbs and wow do they help...
  20. 01Konvict

    Rocket Man's 2008 Bagged CC Silverado Build AKA "THE MACHINE"

    I would paint the center strip in the amber lights because you don't have that same line for the headlight section. I like the silver painted side but leave bowls chrome as you have them taped off currently. Leave projector shroud chrome to make all that work stand out. Also the unpainted...
  21. 01Konvict

    07' Yukon Build Thread

    Those headlights are begging for a retrofit to match those xb fogs! Esky rack all black would look sweet on it.
  22. 01Konvict

    Advice on rust + install found on 2010 Tahoe underside

    If you get it stripped and painted on the frame and suspension. I would go for it as long as the price is where I said to cover the restore process.
  23. 01Konvict

    Leveling a 2009 Z71 Suburban?

    No you will be fine with them not over extending. I wouldn’t go higher than 2.5” on front if you’re 4wd.
  24. 01Konvict

    Advice on rust + install found on 2010 Tahoe underside

    Low miles but that’s some rough wear under it. I mean each part needs to be sanded and painted or coated. I wouldn’t pay more than trade in to private party value in good to fair condition for it based on kbb numbers. Check nada too they will be lower but gives you an idea. The lift and tires...
  25. 01Konvict

    Rocket Man's 2008 Bagged CC Silverado Build AKA "THE MACHINE"

    Duh @Rocket Man this was mandatory to be done, now tape off interior to color match

Forum statistics

Threads
132,367
Posts
1,866,834
Members
96,992
Latest member
a-reem

Latest posts

Top