Show off your 2015+ leveled Tahoes and Yukons!

[Demer]

Did you ever get those 285/60/20's with the 2.5 level? And do they rub?

I've got 285/60/20's on a 2.25"/1" level and have not experienced any rubbing.

 

[CMORGAN]

I've got 285/60/20's on a 2.25"/1" level and have not experienced any rubbing.

Thanks I really wanted the 285/60's for a little more sidewall but I really really don't want to cut on my rig. What is your offset?

 

[Demer]

In my opinion, I'd say go for it. Since I've had no rubbing there is no need to cut or trim anything. Fills out the wheel well nicely.

 

[CMORGAN]

In my opinion, I'd say go for it. Since I've had no rubbing there is no need to cut or trim anything. Fills out the wheel well nicely.

Do you have any pics or a link to your build?

 

[Demer]

Do you have any pics or a link to your build?

Sure do. Here is a thread I started a while ago, there are pics on both pages.
http://www.tahoeyukonforum.com/threads/got-some-new-shoes.97748/

 

[ttusomeone]

Thanks I really wanted the 285/60's for a little more sidewall but I really really don't want to cut on my rig. What is your offset?

As long as you don't go crazy with the negative offset, the only thing you'll possibly have to trim is the corner piece on the inside front fender. In my opinion the square off stock design doesn't look great anyway and rounding it off gives it a much cleaner look (even though you can only see it if standing at a certain angle and looking down towards the front of the inner fender.

 

[SteveoTahoe]

View attachment 179912 View attachment 179911 He's a picture of mine.

Leveled
BFG all-terrain 285/55/20
Black Rhino wheels

anyone know what offset this might be? I am ready to pull the trigger on these wheels and am looking at +12 but I don't want any stick out. Flush would be Ideal for me as Im going to rin 275 / 60 20's

 

[01Konvict]

anyone know what offset this might be? I am ready to pull the trigger on these wheels and am looking at +12 but I don't want any stick out. Flush would be Ideal for me as Im going to rin 275 / 60 20's

+12 will be flush for sure

 

[CMORGAN]

+12 will be flush for sure

perfect.
https://www.wheel-size.com/calc/?wh...-60-20X9ET12&fcl=0.5in&wcl=4in&scl=2in&sr=0in

 

[Ryan6769]

So it sounds / looks like a 2.5”F / 1.5”R setup is indeed a good look. That’s what I bought for my ‘18 Yukon Denali and was questioning it now that I’m about to get it installed (was questioning 1” vs 1.5” in rear).

I bought 305/55r20 Ridge Grapplers to go along with it.