Search results

  1. RB_Trucker

    Rear lift springs???

    That’s what it looked like to me when I installed them. Seems closer to 2” than 2.5”…. When I’m home in a few weeks I’ll take a measurement. Even with a 3” spacer up front I still have a 1.5”-2” rake at the rear…. I also have a non autoride model.
  2. RB_Trucker

    Cheap easy built my own 3-4” lift

    eBay is where I went to, most quality vendors have a page with their products on it, been using for years.
  3. RB_Trucker

    Cheap easy built my own 3-4” lift

    I went with some eBay ones for $250 for now I just swapped the ball joints to the right size…. They work well for street work but I’m looking @ bajakits or a dirt king setup eventually with 3.0 coilovers. the stock strut has met it max travel for what I like so it’s time to upgrade again…. I...
  4. RB_Trucker

    Rear lift springs???

    This is my rear suspension setup, Z71 coils and 2” spacer gave me the perfect 4.5” height and factory ride and rake for heavy loads….. front is just a 3” spacer. Has 7k miles on it and love it. So does the wife
  5. RB_Trucker

    L86/L83.Flex fuel conversion with pics and part #s

    I have a Flexfuel conversion on my 2019 LT suburban, the sensor harness under the driver side passenger door jam where the pigtail is blind plugged right by the frame rail in front of the fuel tank. 1 GM sensor and some npt push fit connectors rated for fuel systems…. I haven’t sent the tuning...
  6. RB_Trucker

    Cheap easy built my own 3-4” lift

    Half the bumper is being cut off for a pre-runner style tube bumper so I can keep my front park sensors, but I’ll be taking that valance off when I get a chance this week. I’m running a 275/65-R18 fuel grabber, no rubbing on the wheel wells but some on the front sway bar. The Z71 coils are...
  7. RB_Trucker

    Cheap easy built my own 3-4” lift

    That’s my ‘90 V2500 Silverado package I don’t mention too much about
  8. RB_Trucker

    Cheap easy built my own 3-4” lift

    Here’s an update to my 3” lift install. Everything fit up nice with no issues. Took about 6 hours with a jack, jack stands and a combo of hand tools and air tools. the Z71 coils and 2” spacer with a 3” front spacer combo give a nice close to factory rake and ride.
  9. RB_Trucker

    Cheap easy built my own 3-4” lift

    I really like the way that sits especially with the 22s, I wanted to stay with the 22s but the wife really liked the rims I picked out and the style tires because she drives it 80% of the time while I’m out on the road. I forgot to mention I did get upper arms for the truck because I have the...
  10. RB_Trucker

    Cheap easy built my own 3-4” lift

    I always read about everybody asking about what to use for your 3-4” lift and how to do it. so I just want to show a sample of what I’m doing for my 2019 suburban LT 4x4. I posted Pics for reference, the tires btw are Fuel mud grabbers 275/65-18. I don’t have the fancy suspension options so...
  11. RB_Trucker

    Mobil 1 212, 212A oil filter changes

    I try to stay with ACDLECO ultra filters, they work and guaranteed to fit. I tried the Mobile1 filters and didn’t like them. I saw an MPG drop with their oil and filter…. Now I use ACdelco ultra filters and Penzoil synthetic 05w20 and have had better results oilpressure/fuel economy/performance...
  12. RB_Trucker

    CRC intake valve cleaner

    I still have a can of that @ home…. I still haven’t used it because my valves are pretty damn clean, I’ve been running the 91 octane tune from BB performance with nothing but Chevron, Shell or 76 gas filled in the tank since 6,000mi… I’m at 43k and the truck runs amazing still. keeping up with...
  13. RB_Trucker

    Would you buy your Yukon/Tahoe again?

    I would 100% buy my Suburban again. I love what I got and the options it came with.... nothing fancy but just the right amount of luxury.... I want another one but this time I wanna look for a 2019 Duraburb built 3500 suburban or a used fleet 3500 LT suburban with the 6.0
  14. RB_Trucker

    Question for those with corsa

    I have a corsa sport sport on my 2019 LT suburban, I absolutely love it no drone at all and sounds very aggressive on a cold start and full throttle but mellow at idle and cruising speed. In my eyes well worth the 1k for it.
  15. RB_Trucker

    What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

    After break-in procedure was done I did about 170 miles of street/freeway driving, initial bite is way better and just as smooth as factory, they’re very quiet too.I like how much stronger the brakes are as the pedal is pushed down. I’m thinking it’s the Ceramic pads making alot of the...
  16. RB_Trucker

    What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

    Yes wifeys spirited parking lot driving it’s to blame for this one lmao
  17. RB_Trucker

    What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

    I installed the ACDelco slotted rotors and ceramic pads PN/SDPR210TK along with a 0w20 synthetic oil change with a ACDelco filter PN/UPF63R. New cabin filter and cleaned my Volant CAI filter. It was a day for general maintenance 35,700 it was due for some love.
  18. RB_Trucker

    Introduction and request a diagnosis of a very loud cold start sound

    Wow bro that’s insane, well I’m glad it wasn’t anything massive or being destroyed beyond repair....
  19. RB_Trucker

    Introduction and request a diagnosis of a very loud cold start sound

    As soon as I heard that video I instantly thought power steering pump.... it can be electric or belt driven and it’ll make that whining noise with low fluid until the fluid warms up enough to the Hot/low or the Cold/full mark on the reservoir.... top it off and should go away, if not then a new...
  20. RB_Trucker

    Performance mods!

    I don’t even know the Brand, it was a $60.00 one off of Amazon that I got and kinda pieced together myself. But it works well for what it is. I empty it out every oil change.
  21. RB_Trucker

    Performance mods!

    Honestly that’s an excellent start for mods... I have the Volant CAI, BB tune, SS Corsa Sport cat-back, catch can and reverse level. absolutely love it. now... If you wanna get a little silly later on you can do the 6.2 intake manifold and throttle body swap, headers and install the E85 %...
  22. RB_Trucker

    2019 Suburban mid travel

    That’s pretty much what I want to do, Tons of free travel, upper and lower uniball arms and I don’t mind pushing my front track out 2” on each side. I was looking at Baja kits and Icons mid travel kits. glad I could see the rear set up too, I was thinking the Z-71 and 2” spacer setup also...
  23. RB_Trucker

    Thoughts on my 2020 Tahoe LS

    I’m glad you love your LS, I’ve always had a thing for base LS model GM trucks and SUV’s. I had a 2017 blue Tahoe LS 2wd w/18’s after trading in a 2016 Cruze LS. I absolutely loved it and the wife did too. It was faster than the 6.0 04 Denali we had before while easily getting 25+mpg on the...
  24. RB_Trucker

    2015 GMC YukonXL- Fox Coilovers

    I’m interested in seeing how your build goes, I have a 4wd ‘19 suburban Im looking to setup as a “prerunner”. 4” max height.
  25. RB_Trucker

    2019 Suburban mid travel

    That’s good to know man, it’s a shame that has happened. Fiberwerx is another place I was looking into.

Forum statistics

Threads
132,367
Posts
1,866,834
Members
96,992
Latest member
a-reem

Latest posts

Top