Search results

  1. F

    2010 Escalade seat Heater module.

    Waiting for the part to arrive..
  2. F

    2010 Escalade seat Heater module.

    Hi All, The seat heater module on my 2010 Escalade is toast and needs replacing, one of the relays just buzzes. Do anyone know if the Ford truck module will work, the plugs/pins look identical.
  3. F

    99 Yukon transfer case issues

    Put a 9/16 wrench on the TC shift shaft,with encoder motor removed, see if you can move it to 4 high. Might have to jack up the rear diff so axle will roll, while trying to shift.
  4. F

    Lug nut size for fitting under center caps?

    https://www.amazon.ca/Wheel-Accessories-Parts-Lug-Silverado/dp/B0BJNQY8YV/ref=sr_1_45?crid=1OK5G5XPNLS5M&dib=eyJ2IjoiMSJ9.Bu3t3J9K2p98MHOectI7OsXmctNCaaezc4mg336eKbNQMbJUkQSVMRijMGR4U29yagerBIbaTStkvc5xc_vsJ-lNKvrvFBiIEdW23PwLD5Y8LjfFRGwOo-bI19cdN9H6W2-6WobswqSoa9ZnFtvkBeUsSSkp_Z2RKAWYSYbXgKaJ-gB...
  5. F

    Rear Main Seal OEM or Felpro

    That's like asking if one prefers blonde over red heads. I use both, whatever is available. The last one I did, It was felpro, like in the picture.
  6. F

    Rear Main Seal

    Yes, just bypass the neutral safety switch.
  7. F

    Rear Main Seal

    To check out the test start,oil leak check;
  8. F

    Rear Main Seal

    I just finished the RM seal and oil pan gasket, with new oil pan, on my plow truck. It's a 02 silverado 2500hd 4x4. I bought the seal installation tool kit, worth the money, for the install, I also had to replace the flex plate and TC, as it was bent and converter had a messes up centering...
  9. F

    5.3 Tick/Knock?

    Just about everyone I have owned, were noisy on cold start,but usually quite down when warm.
  10. F

    Are motor mounts easy to replace with exhaust manifolds removed?

    https://www.amazon.ca/dp/B0CHMRHMSB?ref=ppx_yo2ov_dt_b_fed_asin_title
  11. F

    Are motor mounts easy to replace with exhaust manifolds removed?

    I got one of thies from Amazon, I had two broke bolts on the drivers side. It works well.
  12. F

    TTY head bolts with engine in-vehicle

    I have wrapped masking tape, I perfer yellow, around the scoket , write two marks on it 90 degrees apart. Put a reference start mark on the head.
  13. F

    Are motor mounts easy to replace with exhaust manifolds removed?

    I remove the front tires and inner plastic fenders to get at the manifolds, remove the MM bolts and jack up engine with floor jack and a piece of 2x4 under the oil pan, remove mounts. The last ones I did the SS mount heat shield broke, I just re-riveted it back in place with mount installed. I...
  14. F

    Timing Cover Gasket Replacement

    Rock Auto has it.
  15. F

    Best Magnetic Ride Replacement for Motion Sickness Prone Family

    Drag a short piece of chain, from frame to touching the road with a couple of links draging.
  16. F

    Rattle in the steering wheel after gravel road

    In the first 3 minutes he show's where the coupling is.
  17. F

    Rattle in the steering wheel after gravel road

  18. F

    How to Remove Service Air Bag Service Ride Control DIC Messages Permanently

    Inline resistors might work. They get installed where the wires connect to the shock.
  19. F

    Rattle in the steering wheel after gravel road

    There's a coupling on the steering shaft about 6-8'' below the top of the steering wheel, you have to remove the plastic housing/trim below the wheel so you can see the steering shaft, you can get at the screws from/through that area, just turn the wheel to rotate the shaft to view the screws...
  20. F

    Seal/Gasket Between Transfer Case & Transmission

    That adaptor cavity has trans fluid in it, that's why it leaks, also if the TC input seal fails it can dump the trans fluid out through the TC vent. We removed a TC, from my 02 Silverado HD plow truck, yesterday,,, gasket leak.
  21. F

    Need help sealing Transfer Case to Transmission

    There’s a seal on the transfer case and paper gasket between the two. I usually put a smig of rtv on the gasket surface before bolting up

Forum statistics

Threads
132,425
Posts
1,867,888
Members
97,100
Latest member
SC2010YukonRed

Latest posts

Top