Search results

  1. Y

    Transmission gears 2-4 not going in.

    From gear 1 i have to step on it to like 4000rpm let go of the gas and it will go into 3rd gear. Had the code p1870. Anyone had this problem? What do I do to fix it? Thanks.
  2. Y

    1996 Yukon fuel pump is running after vehicle is turned off.

    This is what my problem was too. The pinched harness that runs on top of the transmission that is.
  3. Y

    1996 Yukon fuel pump is running after vehicle is turned off.

    Thanks for all your help guys but I think I will have to let a knowledgeable mechanic tackle this because I also had an abs light pop on today...what more do I need? I love the damn truck, I used to own a bronco before this one and believe me riding the Yukon is 100 times better, but I wish the...
  4. Y

    1996 Yukon fuel pump is running after vehicle is turned off.

    Yeah I definitely removed the right relay, and I got so pissed off I took the tank down to check the wiring harness to the fuel pump. The ground pin in the connector seemed to be pushed inside. So I thought I found the problem, but I bought a new fuel pump and a new wiring harness, replaced both...
  5. Y

    1996 Yukon fuel pump is running after vehicle is turned off.

    I turn off the truck and the pump still runs. I have to unplug my battery cable to stop it because even when I pull the fuel pump relay it still runs. What's up with that? Is my pump bad? I replaced it like 2 months ago. Another issue I have is my oil pressure gauge is not working, the needle...
  6. Y

    Question about transmission replacement.

    So, I have a 96 Yukon in which I need to replace the tranny. It has the electric push button 4x4. I found a tranny at a good price but it's from a Tahoe with the floor shifter for the 4x4. Would that swap work or would I have to do some serious modification?
  7. Y

    1996 Yukon Transfer Case Problem?

    Well... I solved the fuel leak...luckily when I dropped the tank it was only a disconnected line. So I popped it back in and it started up fine. Phewww if only all problems were like that. Still I am pissed with that grinding...and don't know wtf the problem is, but if it's the transmission I...
  8. Y

    1996 Yukon Transfer Case Problem?

    Hi everyone. Once again I am updating on my ongoing project lol. So, I finally replaced the trasnfer case. It wasn't too difficult, i found that the hardest part was putting the replacement up and bolting it in place.It's kind of heavy if you're rolling on the ground. Luckily I had an extra set...
  9. Y

    1996 Yukon Transfer Case Problem?

    Thanks for the tip 95TwinTT. Luckily the underneath frame and most of the other components have little to no rust so I shouldn't have too much trouble with the bolts, but I will definitely spray some PB Blaster on them.
  10. Y

    1996 Yukon Transfer Case Problem?

    Yeah I was underneath while having someone put it in gear, I was listening to the motor and I put my hand on it and it was vibrating...I don't know if there is an easier way of checking it? But I figure since there was no oil in the tail housing when I took it apart somebody must have ran it dry...
  11. Y

    1996 Yukon Transfer Case Problem?

    Hey T-Bagg thanks for the reply. So, did you have to chisel off the rivets and remove the cross member? Because I was wondering the same thing, I was like why the f.ck they put rivets there? To piss me off?
  12. Y

    1996 Yukon Transfer Case Problem?

    I just wanted to update on my slow going project. I took off the drive shaft and the tail housing from the transfer case to see if the snap ring was broken...well to my disappointment it was all in one piece, I was hoping it would be that easy fix, but now from the looks of it I'm going to...
  13. Y

    1996 Yukon Transfer Case Problem?

    Thanks a lot DJTRricky. Forget the shop, I will try to tackle this project myself. I used to work in the garage so I know a couple mechanics that will give me a hint or a hand just in case I don't know how to do something. But it's funny because they all were telling me different things that...
  14. Y

    1996 Yukon Transfer Case Problem?

    Hey guys I just bought this truck for fixing up. Started off thinking it had different problems now ended up here.I have been trying to figure out why my transfer case is grinding and clicking. When I put it in drive it will go with ticking/clicking but when I switch to reverse it makes this...

Forum statistics

Threads
132,425
Posts
1,867,903
Members
97,101
Latest member
mechanic0

Latest posts

Top