Search results

  1. kbuskill

    Exhaust question - Extention pipe off catalytic convertor in stainless steel?

    https://www.summitracing.com/search/part-type/exhaust-flex-pipes/flex-pipe-material/stainless-steel Just search Stainless steel flex pipe. Amazon has some choices as well.
  2. kbuskill

    Ethanol percentage flex fuel

    Got new Delphi Pump installed today. Ran the truck extremely low on fuel to make it easier, very uncommon for me as I usually fill up when it hits 1/4 tank. So far so good. I fueled up afterwards and it calculated the Ethanol percentage at 3.1% after driving it for a while. I am curious what...
  3. kbuskill

    Humorous Story and Question

    Not 100% sure about these trucks but the older trucks used a viscous coupling inside the AWD transfer case and the rear tires would have to spin up to a certain speed/rpm before the viscous coupling would really transfer power to the front wheels. I have heard of guys partially setting the...
  4. kbuskill

    Z55 Delete on my 04 Yukon XL, 8.1ltr, 4x4

    The 3.9 ohm resistors splice into the plug on top of the strut. Just leave the ride height sensors in place. If you absolutely must get rid of them, which they aren't hurting anything being there, then unplug one of them and test the resistance across the sensor (while it is at ride height...
  5. kbuskill

    Cargo shade GMT400

    It doesn't appear to. I don't have a truck to put it in to test it so I will have to get my son to hold the other end... lol
  6. kbuskill

    Base Radio Front Speaker Wiring.

    It looks like the front speakers wiring splits at the end of the dash board. If you look there is a panel on each end that pops off. The rear wiring doesn't specify so my guess would be maybe under the carpet somewhere.
  7. kbuskill

    Cargo shade GMT400

    Bump to the top
  8. kbuskill

    Kbuskill's 2008 Burb LTZ "MOD" Thread

    Thanks. I asked Ceasar from Lightwerkz about the bulbs they offer. Here is my email... Hey Ceasar, I was thinking about getting a different color temperature bulb as these 5000k bulbs are a little more yellow (halogen color) than I was used too. I am debating between the 6000k Morimoto or...
  9. kbuskill

    Tech 2 Owners Map

    Wow, this has really gotten off to a great start. Thanks to everyone who has posted so far. I always think it is cool to see a forum community pull together and help each other out in a common interest.
  10. kbuskill

    08 Bose Radio Questions

    I have used the overlays on the HVAC controls and they work great. One thing to look for is to make sure that the overlays allow for light transmission through the areas where it is supposed too. This way they look just like they did from the factory at night.
  11. kbuskill

    Kbuskill's 2008 Burb LTZ "MOD" Thread

    I was just reading about HIDs and some people were saying how the color will change slightly as they get used or "burnt in", I don't know maybe it is BS. I know from past experience that when I have had HID bulbs go out in the past they would sometimes not fail completely but would get a darker...
  12. kbuskill

    08 Bose Radio Questions

    It depends on if you have to have the latest and greatest or not. Also if you shop around you will probably find better prices. Crutchfield is a good place to go look and see what is a direct fit for your truck and what adapters you may need. I usually use them to make a list and then shop...
  13. kbuskill

    Tech 2 Owners Map

    There are quite a few members that have a Tech 2 and there are always people who wish they had one to use so I thought I would post this thread to try and help each other out. If you own a Tech 2 and would be willing to help out another forum member that might be local to you then post up your...
  14. kbuskill

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    I don't have an answer for you unfortunately but this reminded me of something I was going to mention. We should start a thread and maybe get it stickied with all the guys who have a Tech2 and would be willing to help someone out local to them with maybe just City/State or Zip code/State info...
  15. kbuskill

    08 Bose Radio Questions

    It can be swapped over to a navigation radio. It will have to be unlocked or programmed to your VIN or it won't work. There is a separate GPS antenna and it plugs into the back of the HU and mounts to a metal plate underneath the forward most dash panel, closest to the windshield. If you pop...
  16. kbuskill

    Kbuskill's 2008 Burb LTZ "MOD" Thread

    I probably should just wait until the parts come in and they are fixed, but when I pulled the lights again the other day to trim some metal behind them and get them to fit a little better to the body, I inserted a big screwdriver into the back of the projector housing where the bulb goes and...
  17. kbuskill

    AFM delete / Tuner for 2011 Yukon Denali 6.2 Question

    I have the Diablosport I2.
  18. kbuskill

    AFM delete / Tuner for 2011 Yukon Denali 6.2 Question

    It was in my post... '08 Suburban with the 4L60E. I was unaware that the trans tuning isn't available for the 6L80E... that is pretty crazy.
  19. kbuskill

    AFM delete / Tuner for 2011 Yukon Denali 6.2 Question

    How did you come to this conclusion? The Diablo tuner allows for line pressures to be adjusted, shift points altered, torque management reduction, torque converter lock up, etc. At least it does on my '08 with the 4L60E.
  20. kbuskill

    Kbuskill's 2008 Burb LTZ "MOD" Thread

    They went in fine and the holes lined up. It was like after they got hot they seized up.
  21. kbuskill

    Kbuskill's 2008 Burb LTZ "MOD" Thread

    My Morimoto 8.0s came with the Motoholder/bulb holders already attached to the back of the projectors so I just removed the screws they had in them and then reinstalled the same screws.
  22. kbuskill

    Kbuskill's 2008 Burb LTZ "MOD" Thread

    I am currently waiting for the replacement parts to come in. When they get here I will try removing the nut and see what happens. I requested a new reflector housing, lock nut, and Motoholder base/w screws. I hate that I will have to bake that light back open, BUT at least I know what to...
  23. kbuskill

    New BTR Truck Torque Cam

    The Denali and Escalade got the 6 speed transmissions starting in '07. The rest of the trucks didn't get them until '09.
  24. kbuskill

    Kbuskill's 2008 Burb LTZ "MOD" Thread

    I have the 8.0s and Lightwerkz lists the bulbs as Morimoto XB 5000k... to be honest I am thinking about changing out to the 6000k bulbs because the ones I have look more like halogen color than the bright white like yours. Maybe the bulbs just haven't "burnt" in good yet.
  25. kbuskill

    Retrofit Headlight opinion???

    https://www.tahoeyukonforum.com/threads/kbuskills-2008-burb-ltz-mod-thread.100141/page-96#post-1578523

Forum statistics

Threads
132,668
Posts
1,872,329
Members
97,473
Latest member
arto832

Latest posts

Top