Search results

  1. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

    It’s on the list. Getting close to crunch time though and I am awaiting a package to get delivered with something for the stereo I need to install before surf city in august lol
  2. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

    yeah good excuse to pull the motor completely out for a billet stall too :burnout: and yes when I had my 7 agms 2 of them were under the hood. a couple months before I switched to lithium I sold my secondary battery to my buddy. No use for it now
  3. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

    Glad I always am a hoarder of old parts. :emotions33:After some digging through boxes I found my factory fender braces to swap out with the rusty secondary battery tray. Wiped the cob webs and dirt off of them and took off those factory stickers on the plastic core support cover that were so...
  4. Thatsquishykid717

    Tahoe/Yukon Headlight Information Thread

    I agree with @05Single he is a little more ballsy than I am though I just always bake my lights at 170° for 7-10 min at a time. I always use morimoto retro rubber. Used the Home Depot stuff before but didn’t have the best luck with it. I did get lucky with a set of corner lights before I was...
  5. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

    Got the engine bay cleaned today. Ashamed of myself for ever letting it get this bad. Lol. My girlfriend got me a custom etched acrylic hood prop for shows/competitions. Turned out so awesome! Also got a new teardrop dc audio bass knob wheel. Need to find my passenger side fender brace so I...
  6. Thatsquishykid717

    Fosscore's 2006 Tahoe Build Thread

    hahaha just joking around. He seems super stoked on it and seems like he will take really good care of it
  7. Thatsquishykid717

    Fosscore's 2006 Tahoe Build Thread

    Sad to see you sold it but sounds like you’ll have some awesome stuff going on with a build none of us can do. The guy who bought it posted it on a Tahoe page On fb that I’m apart of. @05Single and I agreed we will take care of business if he doesn’t take care of that Tahoe hahaha. ;)
  8. Thatsquishykid717

    2004 6.0 NV4500 Tahoe

    Damn I’m not on here for a week, talking to @05Single everyday and he ends our bromance over a gas cap....I see how it is :win:
  9. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

    Yeah my back was hating me with the enclosure swap I’ll tell you that much lol just happy it’s done and I never want to do it again haha
  10. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

    New switchbacks came in. Still unhappy with how bright they are but at least they are more of a 5000k white unlike My last ones so they do match the headlights and fogs a little better. Happy about that at least. These are the type 2 so when you hit the turn signal it flashes...
  11. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

    After bitching to my lady and everyone else for months and months that I have to set my e brake everytime I park to disable the auto headlights, I finally got a resistor to put in and fix that. Tinted windshield made them come on more than they should have and trying to not shorten the life of...
  12. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

    Yeah shits weak duhhh
  13. Thatsquishykid717

    Anyone have experience with a Mechman Alternator?

    I have ran dual mechman 270s and dual mechman elite 370s. Had good luck with them so far. I bought the 270s used and already a few years old, had one go out and mechman rebuilt it for 100 bucks, the next year the other 270 went out as well and mechman rebuilt then as far as I know they are...
  14. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

    so the old one was about a cubic foot to big(10cu ft) it Was only 1 sheet of 3/4 birch on the bottom sides and back, the front was double and the top was triple thick. I was having problems with the subs moving to much and I tried to shrink and stuff to get it to be louder but nothing was really...
  15. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

    My back hated me after this. Pull the subs out, place them in the new enclosure, mark holes for subs, pull subs out, pre drill holes, drill in terminals, vacuum and wipe down enclosure, final mount ports , get it in the Tahoe, install back three subs, push enclosure back, install front 3 subs...
  16. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

    Now that the interior of the enclosure is coated I was able to sand the exterior and stain it. I really like the black stain I used before(plus it matches everything else) so I just made it slightly darker this time. Just a true black minwax water based I used a 3x clear gloss poly stain for...
  17. Thatsquishykid717

    Tahoe/Yukon Headlight Information Thread

    I did oem+ style kind of. A little custom still but kept it simple
  18. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

    need to get a better picture of the light output should have centered the Tahoe on the road here
  19. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

  20. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

    Fine I’ll show more on that. For anyone reading the recent comments between @05Single and I.... we both got our fog lights done. He showed me them and sent me some brackets for the install so I was waiting for him to post on here showing them so I didn’t steal the thunder from him lol. Jeep...
  21. Thatsquishykid717

    05Single's virgin build thread. 03 tahoe

    about damn time you updated. Haha I’m excited for that cluster to be done!!
  22. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

    Yeah i have no idea what @05Single is talking about. Lol. More progress on the enclosure. Really hate wood. Really really hate it. Liking this glaze coat though it’s coming out nice.
  23. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

    It’s okay I bet that dude lives somewhere far away anyways. He won’t do nothin :yaoface2:
  24. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

    Idk i think they could be. I did find this picture on google of similar ones though. Dude has some nice led switches too. o_O
  25. Thatsquishykid717

    Nearly 4 years later, my 2001 Team DC Audio build

    Taking my sweet time with this enclosure. Almost done with the glaze coat then I can get the top baffles on. After that it’ll be ready for sanding and stain.

Forum statistics

Threads
132,711
Posts
1,873,021
Members
97,532
Latest member
schimme

Latest posts

Top