Search results

  1. shreksbrother

    AWD Yukon non denali?

    I had an '03 non-Denali Yukon with the exact same switch. Yes, it has full time AWD. A word of caution, though. With AWD in these vehicles, they are subject to front diff issues (carrier bearings) due to vehicle with and the fact that the front wheels have the added stress on the half shafts of...
  2. shreksbrother

    Missing turn signal sounds

    It restores both. It also gives you switched power, which is nice. Sent from my Galaxy Note9 using Tapatalk
  3. shreksbrother

    Brett's 2004 Escalade 6.0 AWD build

    That's cool, now let's talk about your choice of t shirt. Go Sox. Sent from my Galaxy Note9 using Tapatalk
  4. shreksbrother

    Overwhelmed

    This. I had a similar issue recently, and I could wiggle my ground cable at the battery terminal and it would operate normally again. I just replaced the ground cable Tuesday, so I don't know if the issue is resolved, but I've had no more symptoms! Sent from my Galaxy Note9 using Tapatalk
  5. shreksbrother

    Missing turn signal sounds

    This is the one I used (includes the wiring harness): Metra Axxess GM LAN Data Bus Interface with Chime Retention for Select Chevrolet Impala and Silverado Vehicles https://www.amazon.com/dp/B0049MV2IY/ref=cm_sw_r_cp_apa_7uMTBb3WHPRV9 Sent from my Galaxy Note9 using Tapatalk
  6. shreksbrother

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Ouch, 86! That's some expensive toilet paper! Sent from my Galaxy Note9 using Tapatalk
  7. shreksbrother

    Battery or electrical.

    Have you had the alternator tested as several others have suggested? May have saved you the cost of a new battery... Sent from my Galaxy Note9 using Tapatalk
  8. shreksbrother

    Backup camera location, anybody mount high up underneath the spoiler?

    That's a cool idea! You could just run both cables up to the dash and install a switch like this (it requires no power): http://a.co/d/eI5YNGC
  9. shreksbrother

    How to replace rear tailgate applique on 07+ Tahoe & Yukon/Denali

    Thanks for the info. I'm getting ready to install a rear view camera in mine, so this info is handy! Sent from my Galaxy Note9 using Tapatalk
  10. shreksbrother

    Resetting TPMS by disconnecting battery?

    I tried draining air off my tires to relearn my sensors and it didn't work. I ended up buying this inexpensive tool and it relearned flawlessly. https://www.amazon.com/dp/B072BK693N/ref=cm_sw_r_cp_apa_QnxQBbVQ1X63P Sorry, no clue if the battery reset makes a difference... Sent from my Galaxy...
  11. shreksbrother

    Hole in rubber flooring

    Lol, nice! Sent from my Galaxy Note9 using Tapatalk
  12. shreksbrother

    Hole in rubber flooring

    So I addressed this today. Had a heck of a time finding rubber to use, so I trimmed a piece from under the second row seat. Shouldn't be an issue, as it's elevated and out of the way. I then trimmed the peeling piece in the front and gorilla epoxied the new piece from the second row. Once that...
  13. shreksbrother

    Hole in rubber flooring

    Thankfully it isn't.. but for sure it will be a few years after being in Michigan. Maybe I can find a Crown Vic at the junkyard and cut a patch of flooring out of it (since they're plentiful in junkyards). If I can trim it and get a good edge, maybe I could use gorilla tape on it. I like the...
  14. shreksbrother

    Hole in rubber flooring

    That's a complicated solution... I don't have a welder, unfortunately, but I'm not sure I would want to drill holes for rivets. The original floorboard is excellent right now, so I think I'll keep the aim on just sealing up the hole. Thanks for the suggestion! Sent from my SM-N960U using Tapatalk
  15. shreksbrother

    Hole in rubber flooring

    Something like this was my initial thought. But I would need to find a way to join the original floor to the new piece to seal out the moisture. Sent from my SM-N960U using Tapatalk
  16. shreksbrother

    Hole in rubber flooring

    I just bought the truck, but judging by the wear to the seat, this was a hefty officer. Sent from my SM-N960U using Tapatalk
  17. shreksbrother

    Hole in rubber flooring

    Has anyone had a wear hole in their rubber flooring? This was a Texas vehicle so no biggy, but it's now in Michigan, and will be subject to salty water entering on my boots this winter. I'm not too interested in having a Freddie Flintstone floor. Any thoughts on repairing this short of...
  18. shreksbrother

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Yeah, it went up $10 since I ordered it the other day. For it's features, it's still totally worth it! Sent from my SM-N960U using Tapatalk
  19. shreksbrother

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Installed a new stereo with Android Auto and Car Play... Found it on Amazon for $179! Works great. https://www.amazon.com/dp/B07DD7DKT9/ref=cm_sw_r_cp_apa_H8SPBb52TEVK6 Also solved a horrible rattling sound in my dash. Pulled the passenger airbag and all trim and had my wife drive me around...
  20. shreksbrother

    2007-2010 Door Panel in a 2012?

    As a follow up, it was a direct swap and the difference is hardly noticeable. Sent from my SM-N960U using Tapatalk
  21. shreksbrother

    Remote start prep package

    Has anyone tried one of these kits? https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F232665519415 I'm thinking about pulling the trigger on it. Sent from my SM-N960U using Tapatalk
  22. shreksbrother

    2007-2010 Door Panel in a 2012?

    Do you know if the connections are the same? I'm fine using the older switch assembly included with the door panel, especially since it has the power fold buttons. Sent from my SM-N960U using Tapatalk
  23. shreksbrother

    2007-2010 Door Panel in a 2012?

    Well cr*p. I already ordered the door panel not having noticed any difference. Now I see it plain as day. As Tonyrodz said, as long as it fits, it's all good. Since the only problem is the pull handle, perhaps I can just remove it from the new door panel and put it on the existing one .. oh...
  24. shreksbrother

    2007-2010 Door Panel in a 2012?

    Awesome, thanks! PS - You would think by now I would know to put my posts in the correct category :doh2:
  25. shreksbrother

    2007-2010 Door Panel in a 2012?

    Hello everyone, I have a 2012 PPV Tahoe I just bought, and it has a broken handle (as in the grab handle to pull the door shut). On eBay I see tons of door panels marked for 2007-2010, but none (or maybe one in the wrong color) for 2012+. Is there a difference? It looks the same, but I don't...

Forum statistics

Threads
132,713
Posts
1,873,068
Members
97,536
Latest member
BigBodyBurban

Latest posts

Top