Search results

  1. D

    P1351 after replacing ignition coil and icm

    What's weird is that it doesn't run rough at all though, nor any issues with power at any speed, sputtering, etc. The only issue is the P1351 code with goes along wiuth a start, stall after a second, then start again and it runs fine. Plus the mechanic said there is no adjustment for this...
  2. D

    P1351 after replacing ignition coil and icm

    This is what I got
  3. D

    P1351 after replacing ignition coil and icm

    I talked to the guy who just replaced the distributor and mentioned all this and he said there is no adjustment for it. And then I find this. The 5.7L engine is what came in this truck, so I think this may actually apply? I honestly don't even know how to tell, but I think this is what I have...
  4. D

    P1351 after replacing ignition coil and icm

    Ok I Found it. So it says -13.4 (at 1000rpm). What should it say?
  5. D

    P1351 after replacing ignition coil and icm

    @exp500 i got it, bought the gm pid. I'm dumb cause I can't find anything that shows me cam retard or anything like it. Can you (or anyone?) tell me where to find it/set it up in dash command?
  6. D

    P1351 after replacing ignition coil and icm

    I have a regular old OBDII scanner I bought many, many years ago when I was still making payments on the truck. :) I just had the ignition coil, ICM, spark plug wires, and distributor assembly all replaced at the same time, after which this problem presented. Before that, I had a complete no...
  7. D

    P1351 after replacing ignition coil and icm

    Code came back and exact scenario - start fine, run for about a second and stall. Second attempt to start works fine and runs fine after, not rough or anything. @exp500 -wouldnt the distributor cause a more consistent issue?
  8. D

    P1351 after replacing ignition coil and icm

    Ran into a start issue when it was really rainy and wet but started again when the next afternoon after it was been dry. Had original distributor, ignition coil, and ignition control module with 290k on my 97 Tahoe. So I had them all replaced as well as spark plug wires (plugs were already new)...
  9. D

    Rust along the top of windshield on 97 Tahoe

    Have to find someone to do that work (I can't do it). How much would something like that cost?
  10. D

    Rust along the top of windshield on 97 Tahoe

    Well, I just had the windshield replaced last week and they said it wasn't as bad as it looks. But what does "fixed correctly" mean?
  11. D

    Rust along the top of windshield on 97 Tahoe

    Sorry about that - meant to grab a pic initially and didn't. The marks there are from duct tape I put there until I could get the windshield replaced. I know I can't stop it. I'd just like to slow it down and maybe keep the extra water off of it.
  12. D

    Rust along the top of windshield on 97 Tahoe

    I have some rust along the top of my windshield on the passenger side. It was bad enough looking that a couple of shops wouldn't try to replace my windshield (giant crack) but I took I told one I didn't want guarantees, just a new windshield. Anyway, he said it looked worse than it was and now I...
  13. D

    Brake light on dash works backwards

    Definitely a good idea. It's easy enough to do but I'll be a bit surprised if that resolves the issue.
  14. D

    Brake light on dash works backwards

    Thanks guys. The shop says they bled them with the computer and manually as well. Something doesn't add up.
  15. D

    Brake light on dash works backwards

    Recently had an an issue with one of the brake lines to a tire, so had to get that fixed. After I got it back, the brake warning light on the console (the one that comes on when the emergency brake is on) stays lit. Except when I push the pedal down at least half way (I can actually be stopped...
  16. D

    Power Steering when truck is not moving or no fuel

    Yes, you're right. The pump is damaged. No need for further dialog here.
  17. D

    Power Steering when truck is not moving or no fuel

    I expected them to call me when they saw the fluid was black and at least suggest it needed to be flushed and changed. Any responsible mechanic should have done that regardless of what I asked. The pump simply making noise from low fluid doesn't mean it got damaged. It wasn't run long or hot at...
  18. D

    Power Steering when truck is not moving or no fuel

    They did not say before the work. They were asked to replace the pressure and return hoses (which I supplied). I've been using this guy a while so I trusted him. But the helper seems to be complicating things. So, no, I did not agree to a price. And the hours aren't detailed on the invoice-it...
  19. D

    Power Steering when truck is not moving or no fuel

    I don't really want to mess with taking stuff apart more than necessary on this thing so I took a turkey baster and sucked all the fluid I could out of the reservoir and put fresh fluid in it. The pic is what I took out and you can see it's pretty black. And it made a world of difference! Took...
  20. D

    Power Steering when truck is not moving or no fuel

    Talked to the shop...they never flushed it since when they pulled the hoses all the fluid came out. So they just replaced it. Good help is hard to find...
  21. D

    Power Steering when truck is not moving or no fuel

    Honestly I think I might replace it anyway just as a precaution at this point because of age. But I really don't think that I ran it long enough or low enough to damage it. When i drove it the initial 3 miles home, it was loud but not difficult to turn. It was just starting to show a little...
  22. D

    Power Steering when truck is not moving or no fuel

    Not noisy at all. I have a feeling they didn't flush the system.
  23. D

    Power Steering when truck is not moving or no fuel

    Well if it was the pump, wouldn't we expect it to have problems all the time? Because once it revs it runs fine. The leak was sudden, not over time. Driven 3 miles to work, came out and issues. And I put fluid in it and drove it to the shop and it drove fine. My cousin suggested that the...
  24. D

    Power Steering when truck is not moving or no fuel

    So I had a bad pressure line leak on my 97 Tahoe and I put some lucas stop leak in it so I could get it driven up to the shop. I had the return and pressure lines replaced but never had an issue with the power steering before this incident. Now, however, when the truck is stationary it's like...
  25. D

    How do I find a parasitic draw?

    Been a long time on this, but eventually I got to where the truck wouldn't start at all. And when I tested the draw, it was only 38ma, then 26, then nothing over the span of about 5 seconds. I started another thread when it wouldn't start...

Forum statistics

Threads
132,713
Posts
1,873,070
Members
97,537
Latest member
CHENTE

Latest posts

Top