Search results

  1. Mickey_7106

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Yes, SS3 Max. Right now i have them centered (way lower than the pic) and im still blinding oncoming traffic. I found out after i aimed them that fogs are supposed to be aimed down 4 inches from center at 25ft. Like i said, these are hard to adjust. I had to grind down an allen wrench to be...
  2. Mickey_7106

    Performance on a 2007 GMC Yukon Denali

    10s? You're going to need more than a supercharger. You're better of talking to a speed shop and tell them what you want to achieve.
  3. Mickey_7106

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Stock Aimed too high in the last pic
  4. Mickey_7106

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    You're going to be amazed how crazy bright these things are. Hard to adjust on the yukon.
  5. Mickey_7106

    Safe to zip tie Power Running board wires to Passenger side Fuel Lines?

    I would. Just leave them loose for some flex but tight enough to not be hanging too low
  6. Mickey_7106

    Anyone look at jumping to the new platform or you waiting?

    I dont like the new suvs. To me it looks like someone slapped a set of wheels on an elephant.
  7. Mickey_7106

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    anyone know if we have CK or standard wiring? want to order some switchbacks and they have 2 versions. Tried going on to check but im not messing around in this cold weather lol https://www.gtrlighting.com/featured/blog/do-i-have-ck-or-standard-wiring
  8. Mickey_7106

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Nothing, other than it came with the house. Don't even know if it works. It's not in my way so i don't bother with it
  9. Mickey_7106

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Bought these blank center caps, but i can't get over the ugly dot in the center. Gonna return these. Anyone bought blanks that don't have this blemish?
  10. Mickey_7106

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    As much as i like those, they're no longer on my list. They're pretty expensive and i can get the output i want for less with an HID retrofit. These are sealed units, so if the bulb goes out you have to replace the whole unit is my guess
  11. Mickey_7106

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    You got me really considering these lights. Not 100% sold on led tech for headlights, but i really like the design of these housings. They dont look cheap like every other aftermarket housings out there. Here's a short video on them
  12. Mickey_7106

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Can't wait for your comparison. I like how they look. Couldn't find any info on what bulbs they're using
  13. Mickey_7106

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Searching for advice. Need to travel about 50 miles to get my tires replaced. How much damage will i cause if i run the stock 17" (265/75R17)spare on the front left while my right side is a stock size 22" (285/45R22)? Its a 4x4 but stays on 2wd most of the year unless we see heavy rain. I...
  14. Mickey_7106

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    got a nail on my sidewall. Thinking of going to 305/45r22. i've only seen one comment about clearance issues with the power steps. can anyone else confirm?
  15. Mickey_7106

    Full "neon" escalade third brake light

    Very easy. IIrc it's only held by four nuts
  16. Mickey_7106

    High beams always on.

    Alright lol The drl relay was replaced and was working fine. Next morning it went back to high beams always on. We could just leave permanently remove the relay but i like tackling these problems for my learning experience in diagnosing. So, i signed up to autozones site to use their repair...
  17. Mickey_7106

    High beams always on.

    Update. Pulled the drl relay just out of curiosity and it fixed the problem with the high beams. Now they work properly. Swapped the relay from another circuit and the light still work as normal. So, bad drl relay. Can't figute out how the drl and highbeams are tied in together. Thanks all
  18. Mickey_7106

    High beams always on.

    Im not very good at reading these diagrams but i can get by enough. Most issues i have is i dont know what and where certain locations are ex. C4,b1 etc. Is the headlamp switch and headlamp dimmer switch the same device (yellow)? Since both the highbeam signal and flash to pass from the bcm go...
  19. Mickey_7106

    Need help choosing a battery upgrade for system

    Correct. That's how my and probably every rv in America is set up
  20. Mickey_7106

    High beams always on.

    I don't have a tech 2. Forgot to mention relay is new. I would like to check b4 and c4 and c3, c1 but i don't know what or where those are.
  21. Mickey_7106

    Delete please

    Please Delete
  22. Mickey_7106

    High beams always on.

    Wondering if someone can help fix this issue with my brothers 2001 tahoe. For a long time now his high beams stay on when the headlights are turned one. Pulling the multi switch to high beams does turn off low beams but when you switch back to lows the highs remain on. I've checked the headlamp...
  23. Mickey_7106

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Had to replace the lift support on the gate. After a Google search i decided to replace the gate and rear glass with strong arm supports. Best replacement so far. The generic supports i had for the rear glass would give out below 62°. Always had to hold the glass up with my head. Now the glass...
  24. Mickey_7106

    E85

    E85 $3.49 91 $4.99 Gonna fill up on this corn syrup till 91 goes back down. Truck mostly sits these days
  25. Mickey_7106

    High beams and automatic wipers help

    Hello all. When i pull the lever towards me to flash the highbeams there seems to be a 1 or 2 second delay. It's not instant like every other car i own. It's annoying when i try to use it at night as opposed to the horn, or to give someone the right of way. Anyway to "fix" this? Also, how do i...

Forum statistics

Threads
132,722
Posts
1,873,178
Members
97,551
Latest member
Westernstar8806

Latest posts

Top