Found out it was the rebuilt gearbox that was the problem since there was no whining from power steering. Went to the pickapart and bought a used one and it steers perfect now.
My 2004 Tahoe was hard to turn left with a whining sound. So I changed the power steering well after it was hard to turn right but no whining sound. I went ahead and replaced the hose from power steering pump and the gearbox. Still wis hard to turn right. Next I replaced the gearbox. Now when...
Checked steering shaft and driveshaft U-joints and the slip yoke they're all good. Also the motor mounts and transmission mount all good. The popping sound like theyre coming from balljoints areas on bothside. I will lift it up and recheck every bolt and nut retorque tomorrow. Any recomendations...
Hey guys. I have a 2004 Chevy Tahoe. Before i did the drop i replaced the whole front suspension. The inner and outer tie rods, lower ball joints, upper control arms with ball joints, the sway bar end links and pitman. Then I did a Mcgaughys 33049 3/5 drop then had it aligned. So now 4 or 5...
I am not to savvy when trying to read schematics but if i was shown i can do the work. So i just went another route and looked under the fuse box under the hood and picked the starter wire to the relay cut it and put an off an on switch and hid the switch. It wont start unless i turn on switch...
Hello new guy here. I wanted to know if anyone here knows wire color codes under the steering column for ignition and for the driver side power mirror down left right up. I want to install a killswitch relay on a 2003 GMC Yukon. A friend of mines had one hooked to the side mirror down or left...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.