Search results

  1. Sasquatch

    Muffler upgrade

    The one thing i failed to mention is if you decide on a flowmaster and live in the rust belt buy a stainless steel one or it will rust away in 2-3 years.
  2. Sasquatch

    idler pulley, tensioner question

    Grab the flex plate and try to move it front to back, I`m not sure how much of it you can see in there. " I`ve never had mine off" So you may see a crack around a bolt hole or wherever it may be but shaking it will expose any damage. If you don`t see or feel anything bump the engine over to...
  3. Sasquatch

    idler pulley, tensioner question

    It`s tough to tell where it`s coming from but i have heard a similar noise when the flex plate is cracked. Do you have any odd noises when starting your engine? It`s easy to check by pulling off the inspection cover on the transmission.
  4. Sasquatch

    idler pulley, tensioner question

    Take your serpentine and the A/C belt off and start the engine for a few seconds. If the noise is gone you know it`s one of the pulleys or the compressor. Then spin all the pulleys by hand, If they`re not dead silent and wobble a bit that`s the noise maker. But the noise without tension on a...
  5. Sasquatch

    Mystery part! Can anyone recognize this item?

    Looks like a freeze plug to me. They go in the side of the engine block, If the water in the block freezes that plug pops out instead of the block cracking. Are you the original owner? If not it may have popped out and just fell down there and was replaced...
  6. Sasquatch

    Swirl marks

    It`s next to impossible to damage your paint with a DA buffer. It`s rotary buffers that burn paint if you don`t know what you`re doing. The kit ezdaar posted is a great price and you`ll love it. The only drawback to getting it is that all your friends will want you to work on their paint...
  7. Sasquatch

    Muffler upgrade

    This is the only dyno proven results i could find. This test was on a mustang putting out 370 hp to the wheels. Who knows what the difference would be on our trucks. And in this test they used a 50 series flowmaster, If they used a 40 the numbers would have been a lot closer or possibly more...
  8. Sasquatch

    Muffler upgrade

    If you like the sound of a 50 series flowmaster just get one. The idea that you lose power with flowmaster is the product of people who don`t know their ass from their elbow. But flow through design mufflers like magnaflow will make slightly more horsepower over flowmaster but it`s very...
  9. Sasquatch

    04 yukon belt squeal / harmonic balancer wobble

    In the video it doesn`t look like it`s wobbling to me. But that squeak sounds like it could be a bad idler or tensioner pulley. If it`s under warranty just take it back and have them fix it, If not you can just remove the serpentine belt and manually spin the pulleys and listen for any...
  10. Sasquatch

    Best Way To Free Wheel Hub

    I`ve always used an air chisel with good luck. I just grind the chisel down so there`s a thin blade on it so wedging it between the hub is easier and it causes less damage. I just hit it behind all three bolt holes evenly until it comes out. I`ve heard of the driving down the bumpy road...
  11. Sasquatch

    CarPro Hydr02, if you don't own it your missing out

    Thanks!
  12. Sasquatch

    CarPro Hydr02, if you don't own it your missing out

    I got a bottle yesterday too and tried it out this morning. I just recently used a paint sealant for the first time and i loved the results but you apply it like wax by hand or a buffer and when i saw nathan mention the H2O guard and gloss and i looked into it and the ease of application...
  13. Sasquatch

    Good (or Bad) Service Departments in/near NYC?

    Try paramus chevy. I know more than a few people that bought new and used cars from them with no complaints. If i had to guess it`s about ten miles from the GWB. http://www.paramuschevrolet.com/?utm_source=GoogleMyBusiness&utm_medium=SERP&utm_campaign=GoogleMyBusiness
  14. Sasquatch

    DieHard Platinum 34/78DT Battery?

    Is there a reason you want that battery? I certainly would never pay $250 for one.
  15. Sasquatch

    Corvette Servo

    When blackbear tuned my yukon i had the line pressure maxed out, Does anyone know if putting the vette servo in would cause any problems with the line pressure already maxed? My rear main seal is leaking and since i have to take the transmission out to replace it i`d much rather put the...
  16. Sasquatch

    How to open rear hatch window?

    You should have a button like the one in the picture to the left of the wiper arm.
  17. Sasquatch

    Spark Plug Wires

    Stick with the stock A/C delco wires. I forget which years but there are two different length wires so take one to the parts store and match them up before you buy them. Also stick with the AC irridium plugs as well.
  18. Sasquatch

    Led tail lights

    I don`t have many pics, This is the best i could find. And if you can`t tell i have the smoked ones.
  19. Sasquatch

    Led tail lights

    I have the same ones for about four years now without a problem.
  20. Sasquatch

    What exhaust??

    If that gibson isn`t stainless steel i wouldn`t bother, I had a flowmaster catback and it lasted about two and a half years before it rusted and started falling apart. I think i paid $450. Seeing that you`re from the rust belt my advice is to spend the extra money for a stainless system...
  21. Sasquatch

    Wheel and tire size?

    If you ever want to upgrade to the 07 and up brake swap you`ll need to have a 17 inch wheel. It`s cheap, easy and a damn good improvement.
  22. Sasquatch

    Question about transmission fluid

    Easy killer, Unless the fluid is brown and burnt i wouldn`t hesitate to use that method. I used to be a mechanic and did that on many high mileage cars where the fluid was in good condition and never had an issue. But on the other hand if the fluid was burnt we would refuse to even drop...
  23. Sasquatch

    Question about transmission fluid

    This is a great method for changing all the fluid in your transmission. It uses the transmissions pump to safely flush the old fluid out. It`s very easy to do and i used dex 6. It`s been in there for around 20k with no problems. http://www.gmfullsize.com/forum/showthread.php?t=179148
  24. Sasquatch

    Stainless Steel Lines and Hoses

    Do you mean brake lines and hoses? If so, http://www.inlinetube.com/Preformed%20Lines/Web%20Line%20Listings/CT-CAT-99-06Main.htm
View older results

Forum statistics

Threads
133,081
Posts
1,879,337
Members
98,044
Latest member
Sabrinaklane

Latest posts

Top