Hey guys thanks for the help. I found out that if i flip the add a fuse around it stopped blowing. I think it was some how pulling heat or something from the other fuse or fuses.
No it was pretty simple stupid instructions. Plug the 4 wheel lights to a control box that breaks off to a positive and negative cable. Then as a “Pro-Tip” use a add a fuse to attach a 5A fuse. Im going to look over all my wiring to look for tears or anything out of the ordinary that i...
Update- I changed the fuse out to a 10A (dont have another 5A) they are working fine but i still don't understand why it blew the first time? Would keeping the 10A fuse be bad?
They don’t have the wattage posted anywhere only 12V. They are 4 LED ring lights. The kit has 4 separate lines for each ring that are about 8 feet long to a little box that separates to a little switch and then to positive/negative wires. I had to add maybe 4 feet of 16 gauge positive wire to...
Hey guys, I installed wheel lights last night. They worked fine turned them off turned them on but i go out tonight turn them on and a half second later they cut off. Checked the fuse its blown. The wiring looks fine not pinched or anything. The instructions state to use 16-18 gauge wire and 5A...
Hey guys, Does anyone have any knowledge of what kind of bags I would need to lift it a few inches and lower back to stock height? Would helper bags accomplish this or do they only lift it when it is compressed?
I have a 7-9 FTS lift and need to change the tie rods but the tie rods they have are 250 bucks. Does anyone run anything else that I'm not aware of? I know that regular tie-rods are too long and have to be cut but not a big fan of that. I just wanna drop it off at a shop and let them change them...
Hey guys! I have a 07 Tahoe 5.3 179k miles with rebuilt tranny (45k miles). Just put an 11-inch lift with 37s on. My problem is my rear main seal is leaking pretty bad. If I'm wanting to do a TSP stage 3 cam 216/220 .600 114 LSA, which I believe needs a 2600-2800 stall. If I install the stall...
McGaughys is a great lift, I would also recommend maxtrac suspension (cheaper but still the same quality). I have toyo open country and love them, Gladiators are good too.
after lifting the hoe I have had clucks and pops coming from the front end. It would pop when turning almost to full crank. I look under and the passenger side bracket is held in by one bolt on the bottom. the top bolt is just holding a broken piece there that is no longer doing anything...
I had something similar but my throttle body was pretty dirty. When you clean it just be careful of moving the butterfly flap back and forth, and you will have to plug a scanner in it to relearn the throttle body or it will just idle high. I have seen some people start it let it idle for some...
I’m not too familiar with cams really but i would think if i have to replace the rear main and want to delete the AFM it would be a good time to put a cam in. Ive been wanting an aggressive idle/sound, i’m not to concerned about power as it is my daily and i’m in college with a budget. Anyone...
late response but I jacked it up from the exhaust on the driver side. I believe those bolts are strong enough for that and it worked out fine. Some people use a 2x4 on the oil pan but I figured the exhaust would be better since its on that side.
Im powder coating the LCA which are the aluminum ones and need to pop the bushings out but i cant find any new ones online.. any one know a place to find them? I bought a set of upper control arm bushings just to see if they will fit.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.