Search results

  1. Chert_Detective

    What model are these wheels?

    I've never seen anything like that offered as an oem wheel, not to say it never was, but maybe a dealer upfit option? American Racing and Vision both make wheels like that in 6 spoke 6 lug, but the hexagonal shape around the lug bores is different along with the center cap style (aside from just...
  2. Chert_Detective

    Keep or Remove Running Boards?

    I think after almost two weeks of being lowered now, they finally grew on me and I've decided to keep them!
  3. Chert_Detective

    Mikeyss Build Thread

    The 12499225 are the ones you want, that or a Morel or Johnson. They are not a stock replacement and are designed for performance cams. I've been running them on a 231/246 .640 lift cam without any issues. Along with many, many other people running all sorts of LS combinations. And I'll probably...
  4. Chert_Detective

    Computer upgrades?

    Stock computer will be fine.
  5. Chert_Detective

    AFM delete

    Yeah I've seen his posts a lot while lurking over the past few years. Just one of the reasons I hate the internet, hard to get the tone or context of a conversation across so it always seems like people try to one up eachother with throwing bits of information out one after another. Especially...
  6. Chert_Detective

    2007 yukon mods

    I like those seats! I've seen people swap around interiors within generations which of course is pretty easy, never thought about doing the newer seats. May look in to that!
  7. Chert_Detective

    Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)

    Hahah yeah that is quite the extra mile there!! It will be satisfying in the end though. Keep it up! Much more willing to do the little things than I am!
  8. Chert_Detective

    AFM delete

    Right, the lifters being the hardware. Sorry I wasn't more specific. Yeah, so.. 07 being the earliest lol. Either way, OP has an '08 so none of it applies to him. I was just giving him the cliff notes of why he doesn't have it. We can measure if you guys want though. It's the internet...
  9. Chert_Detective

    AFM delete

    '07 6.2s had the hardware but not the software. '08-'09 6.2s didn't have the hardware or software. '10+ had full AFM/DOD.
  10. Chert_Detective

    Keep or Remove Running Boards?

    I would love some retractable ones, but I have a hard time spending that much money on something like that. If I could find a local person selling some for cheap enough..
  11. Chert_Detective

    Keep or Remove Running Boards?

    What do you guys think? I kind of like the way they look on there. I may unbolt them to see how it looks without them. But I feel like the chrome trim helps separate it from being just another lowered Tahoe which everyone already calls it a one anyways lol.
  12. Chert_Detective

    Hi from the midwest

    Welcome!
  13. Chert_Detective

    Start up

    If you or a friend have HPTuners or anything that can log normal outputs from the computer through the OBD2 port, let it sit for a while (or how ever long until you would normally encounter the issue) and then take a look at fuel pressure when you try and start it the first time.
  14. Chert_Detective

    Start up

    How many miles? Possibly a weak fuel pump or the pre pump filter screen is getting clogged. Normally nothing on the first try and then starting no problem on the second with no cel is an issue with either sending fuel to the rail, or building enough pressure.
  15. Chert_Detective

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    I have never heard of that stuff before. Sounds like you guys like it? I'm going to replace this windshield before the end of year and was going to start looking in to a ceramic coat or water repellent treatment.
  16. Chert_Detective

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Got the alignment taken care of today. It was just too hot this weekend to try and sit out in the driveway and break the jamnuts on the tierods loose and then set everything close enough to drive it to the shop. Really happy with the way the front turned out. Sitting at -0.3* with 5" control arms.
  17. Chert_Detective

    Another Lowered Denali and 1/4 Mile Data

    Fixed the toe enough to go get it aligned. Gave the QA1s 12 clicks for now until I get the rear bump stop brackets cut off the frame and bolt the Belltech ones on there. Those were from a Dragy on a couple street passes. The 13.37 was at 844' DA, ran a couple low 13.50s at about 2400' DA...
  18. Chert_Detective

    So I lowered her a bit and changed the wheels

    Looks good!
  19. Chert_Detective

    Wheel spacers

    I always enjoyed Motorsport-Tech any time I needed spacers or adapters. A little pricey compared to other brands. But they are custom made to order to any dimensions, bolt pattern change, etc and made in the USA.
  20. Chert_Detective

    Another Lowered Denali and 1/4 Mile Data

    When I get it on the scales I'll plug it in and see what we get. I'm not judging the accuracy, I just mean there's too many variables. Unless the trap speed you see is 100% accurate, no tire spin, no left/right movement, no elevation gain or loss, etc. Which is hard to do. Especially going off a...
  21. Chert_Detective

    Another Lowered Denali and 1/4 Mile Data

    Yeah there's all kinds of calculators and formulas out there. So many different variables though. I just had a goal of running consistent 12 somethings before I put the twins on. That'll give me a chance to get the car set up while it's N/A and I know everything is working how it should before...
  22. Chert_Detective

    Another Lowered Denali and 1/4 Mile Data

    I honestly have no idea, once I get the alignment taken care of I'll see if I can find an awd dyno around here. Yeah everything I have is low. Thankfully my driveway and anywhere I normally travel is all relatively flat.
  23. Chert_Detective

    How much rpm

    Looks like torque peaks about 4,500 but hp is climbing until the end. Would you get more power with an intake and exhaust? Yes. Where? That's to be determined. You need to decide where you want it. Primary diameter and Primary length. Large diameter = higher rpm peak torque Smaller diameter =...
  24. Chert_Detective

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Thank you. I have a set of declads goin on, but I'll probably still use the stock 275/55 size for daily driving. Once I adjust toe I'll put the Mickeys on and get some better pictures.
  25. Chert_Detective

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Finally installed most of the suspension. Made a thread over in NNBS Street Suspension sub forum.

Forum statistics

Threads
133,084
Posts
1,879,448
Members
98,048
Latest member
BrancoRST

Latest posts

Top