Search results

  1. yobenny

    2001 yukon installed new (used) instrument cluster

    There is no temp gauge response, no fuel, and the message center stays on with key out runs batter down. Changed the temp sensor, and checked power to it and to cluster, both are fine but still no temp gauge. Any advice is appreciated.
  2. yobenny

    2001 Yukon door trim adhesive removal.

    Hey Folks, This adhesive is really tuff. Any products that will help with this that won't damage the paint? Thanks!
  3. yobenny

    BCM question 2001 yukon

    Buying a used BCM for a yukon 2001 2wd Does this number have to match the original? The rest of the label matches. Thanks
  4. yobenny

    Meter reading parasitic draw that is not pulling down the battery.

    I keep making new posts because nobody is giving any answers.
  5. yobenny

    Meter reading parasitic draw that is not pulling down the battery.

    All the modules are disconnected and all the lights inside are out, tripped the doors, it's asleep. I took the amps reading right after I checked the battery voltage in disbelief that it is still charged, and there is the draw. I just don't get it. A shop that looked at it said the E & B...
  6. yobenny

    Meter reading parasitic draw that is not pulling down the battery.

    One pic showing checking amps on the negative post, it's reading a 3.3 amp draw. I forgot to disconnect the battery and left it for two days, came back realized what I did, checked the battery, it's a half volt lower than it was. How is that possible? Shouldn't the battery be drained after...
  7. yobenny

    Draw on this fuse not sure what the component name is.

    This looks like an auxillary hookup for aftermarket gear but I am not sure where it would be located. Also not sure if just the standard power seats are using this circuit. Any help really appreciated!
  8. yobenny

    Parasitic draw with modules out

    It has a 3.1 amp draw continuous, I just pulled all the fuses, no change. What am I missing? I will do a voltage drop on them now.
  9. yobenny

    Parasitic draw with modules out

    2001 Yukno- A shop disconnected the EVM and BCM a bus bar gauge cluster and a few other plugs inside trying to solve a crank/no start where the fuel pump and other things not engaging. Couldn't find it, said both modules are fried, based on not able to connect to them. Towed it home all taken...
  10. yobenny

    Parasitic Drain on battery power and other electrical problems.

    The fuel pump is not getting power, neither are the dash lights, the code reader and I don't know what else. Crank no start over no power to fuel pump. Checked the relay and rechecked all the fuses looking at amps. Fuses look fine. Cannot understand what is going on here.
  11. yobenny

    Parasitic Drain on battery power and other electrical problems.

    Hello Folks, I am trying to run down a parasitic drain on a 2001 Yukon. I discovered it when the dash lights, the fuel pump and code reader stopped working, I know pump and dash lights at same time. I have cleaned all grounds except the main, it appears to be clean. I checked all fuses then...
  12. yobenny

    01 yukon fusible link

    They want $120 for that. Can't I just make one with an inline fuse in it? Just need to know how big a fuse right?
  13. yobenny

    01 yukon fusible link

    Thank You SIR!!!!
  14. yobenny

    01 yukon fusible link

    Can someone please tell me where the fusible link is on an 01 yukon? Battery wires don't look like they have it on them to me. Videos I see the connections all look different from this box. I am not seeing the fuse in these wires. If this pic isn't what you need to look at please tell me I will...
  15. yobenny

    2004 Yukon problem with lower ball joint what is this?

    image hosting services
  16. yobenny

    2004 Yukon problem with lower ball joint what is this?

    Hey fellas I sure could use some help with this ball joint. Bought this nice 04 and changing out the front end, but this lower ball joint has me stumped. I can't figure out which way to press it out. I can't figure out what it is or how to get it out. Any help greatly appreciated! Thanks! Ben...

Forum statistics

Threads
133,412
Posts
1,885,062
Members
98,535
Latest member
Bmchobbit

Latest posts

Top