Search results

  1. Foot0069

    Oil flow direction

    Forget the above. I'm going to have to buy a new radiator for the peace of mind.
  2. Foot0069

    Oil flow direction

    I'm trying to figure out the oil flow direction between the oil cooler adapter and internal radiator oil cooler. The engine appears to have bound up from a wiped bearing. The adapter and lines have been scrubbed and I just found a shop that can flush the radiator. My hope is that the oil leaves...
  3. Foot0069

    Running tire review thunderer ranger atr

    I know this is an old post but I'm looking at the same tires. Any further thoughts on them?
  4. Foot0069

    Lifter pain, or d... i hope it aint the cam.

    And she got a lot. Reattached the saggy headliner, new fluids and belts. All the grounds cleaned up, interior detailed, and a nice bubble bath. . I'm going to miss her, but I'm looking for to bringing her older sister Virginia the 99 Tahoe back to life.
  5. Foot0069

    Lifter pain, or d... i hope it aint the cam.

    Thanks for the compliment. It's running and driving nicely. Started right up this morning and it was 10° outside.
  6. Foot0069

    Lifter pain, or d... i hope it aint the cam.

    It lives again. Not bad for a 67 yr old working outside. I just have to get a garage of some sort I miss a cconcrete floor.
  7. Foot0069

    Cost to swap engine in a 2017 Tahoe?

    A friend just had the same issue. It was a broken valve spring.
  8. Foot0069

    Lifter pain, or d... i hope it aint the cam.

    Someone should win a pita award for the grounds, the three tabs to hold stuff and sensors on the back of the block. Thought I had everything done underneath till I looked at the trans dipstick tube, and saw I had pushed the bushing into the case when I reinserted it.
  9. Foot0069

    Lifter pain, or d... i hope it aint the cam.

    So far so good.
  10. Foot0069

    Lifter pain, or d... i hope it aint the cam.

    Oops forgot the start, let's see how it goes.
  11. Foot0069

    Lifter pain, or d... i hope it aint the cam.

    Wish me luck.
  12. Foot0069

    Front suspension sag with plow

    That's why I said call customer service at Monroe. Explain what you're doing and they may help. It's not just the length in question, you'll need the proper mounting styles. I'd think it would save you a bunch of search time.
  13. Foot0069

    Front suspension sag with plow

    Hey welcome to the Forum and don't worry about asking the wrong questions. I'm guilty as well. As to the Timbren bits I'd say yes from reading the verbage. No personal experience however. Pricey compared to a hundred dollar set of shocks though. You could pump them up with an air compressor...
  14. Foot0069

    Front suspension sag with plow

    Here's what your suspension looks like.
  15. Foot0069

    Front suspension sag with plow

    I've seen plows on tahoes. Only thing I can think of would be to replace the bars, and or install a set of air shocks. I bet if you talked to a Monroe rep you'd be able to source some in the right length. Since you're in essence fabbing a farm truck, roadability wouldn't be a thing.
  16. Foot0069

    Front suspension sag with plow

    4wd has a torsion bar spring.
  17. Foot0069

    1999 rust free clean truck

    Anybody have any experience with the replacement bezel?
  18. Foot0069

    1999 rust free clean truck

    I really hate how a double din looks in the dash. Reading reviews on the Metra complete bezel is like reading the reviews of the $80.00 amozonian items. Not a lot of warm fuzzies. It's the backup cam I'm liking. Wish there was a quality wifi rig for my phone but all I see look janky.
  19. Foot0069

    1999 rust free clean truck

    Trying to do a bit as I can, red dash leds installed today. The po of my pickup had them in and I liked them. He also put them in the foot well. I'll be going white for the rest of the interior of the Tahoe as I like to see inside well. I put them in the Sub and dig the brightness. I'll post a...
  20. Foot0069

    upper intake manifold bolts.

    Oops, spoke to soon. Need the double headed gizmo bolts. See I don't know what I'm talking about.
  21. Foot0069

    upper intake manifold bolts.

    If you're going to use helicopter coils it really doesn't matter since you're drilling them out to start. Just use a comparable od bolt.
  22. Foot0069

    OBS Truck/SUV CENTER console cup holder...MINT

    https://a.co/d/6DPjgZL
  23. Foot0069

    Who's the ass that did this??

    Makes me so mad. People can be so cruel. I sure love my little buddy. The little vegetable eating thing. Goes crazy for cucumber .
  24. Foot0069

    So i bought a yukon

    Good find. Sharp looking in that color.
  25. Foot0069

    1999 rust free clean truck

    Haven't noticed a fan. I'll have to look.

Forum statistics

Threads
132,707
Posts
1,872,890
Members
97,522
Latest member
onyx24

Latest posts

Top