Search results

  1. king_yukon

    Vacum hose on Heater control valve?

    disconnect and block off the little vacumm hose that comes off the diaphragm and see if that help, dont worry about the nipple on the heat cont valve it won't leak or anything have you checked the coolant? its not low in the rad? proper color? maybe the heater core is blocked might need to...
  2. king_yukon

    Vacum hose on Heater control valve?

    i had the same issue a month ago, it was the heater valve control the picture listed above, just swap it out it's pretty easy you'll lose a little bit of coolant though so have a catch bucket. i think it cost me like 30-40 dollars
  3. king_yukon

    any ideas would help

    so my truck stalled out while warming up sat night. figured it was the fuel pump, had a friend who is a mechanic hop under and bang the tank while i tried to start and sure enough it started. and if i took my foot off the gas it would stall out, finally got it started and drove about 30' and it...
  4. king_yukon

    Lq4????

    Yeah I've found a couple places up here that have rebuilt or new motors but its all over 1800 and if I can get a motor with less then 100000km for a good price then I'd rather throw that in. Just trying to keep the costs down as much as I can. That's why I thought bout the LQ4. I can get the...
  5. king_yukon

    Lq4????

    Well I know I need to do an intake manifold on it as I have in my other thread. But it has high kms on it and have a misfire. I know the misfire could be result of the manifold leak but Im doing a compression test Monday when I have sometime. I just figured if I can be a LQ4 for a good price why...
  6. king_yukon

    Lq4????

    Well Im currently having engine problems and it's got fairly high mileage so Im looking at the LQ4 now but need more info please Im pretty new to these now, from what I've read it's pretty simple swap? can a stock 4l60e work with it? how bout keeping it 4x4 as well or will the transfer case...
  7. king_yukon

    Manifold gasket questions

    Depending on cost to performance gains I would consider modding. Haven't really dug into the top end or really looked at doing much to my top end, but if I'm ripping it apart why not upgrade or mod a few things
  8. king_yukon

    Manifold gasket questions

    Well I have been reading about the manifold gaskets being a problem on here. And figured out that I have to actually put a new manifold in cause mine has a small split in it. I've already replaced my spider injectors and was wondering if there was any other things I can do while I'm tearing...
  9. king_yukon

    Tbar Lift with block

    Springs only cost me $118 after tax and installed for $45 the kit said 2/4wd and 2dr /4dr but I'd still look into it or call a local shop. ---------- Post added at 12:44 PM ---------- Previous post was at 12:40 PM ---------- The 285/75/16 are basically 33x11.5 on 16s which are plenty big...
  10. king_yukon

    Tbar Lift with block

    I haven't decided if i'm gunna change the rims. likely not right now though. I definetly wanna put some 33" tires so if I put them on stock tires I won't have to trim as much? What all would possibly have to be trimmed to make them fit?
  11. king_yukon

    Tbar Lift with block

    so I got my lift springs in the rear now and cranked the t bars up. fender height is 36" all around now. (was about 34" front 34 3/4" rear) just need some 285s
  12. king_yukon

    Exhaust

    I like no mufflers just straight duals, but it's loud!
  13. king_yukon

    Tbar Lift with block

    so I ordered my lift springs today. they should be at the shop in a couple days. and then cranking the tbars to level. can't wait to get it done. also getting some 285s from my uncle. they are the old set he had on his 97 1500 (pretty good shape) he jus bumped to 295s with some really aggressive...
  14. king_yukon

    Tbar Lift with block

    alright I just didnt know if different keys would start at a different offset and allow for more crank. I know everyone says dont crank more then 2" on the keys which I dont intend too anyways. I just want to level the front with the back 2-4" lift springs.
  15. king_yukon

    Tbar Lift with block

    k so the plan so far is i'm gunna put 2-4" lift spings in the back, crawled under my truck today and I snapped one of my leafs and it's not causing any damage (yet) but makes a brutal rattling noise. as for the front end i'm still up in the air. I just want to comfirm, if I change my keys to...
  16. king_yukon

    Nominations for April TOTM, before & after

    Blackedout - Man I gotta say that's the best hoe Ive seen! Looks great got my vote for sure!
  17. king_yukon

    Tbar Lift with block

    So I've read. Any other suggestion as to lifting the front? For a decent budget? I am gunna swap the shocks all around to compensate for the lift
  18. king_yukon

    towing mirrors

    It took about a week to get them (And I live in Canada) And they honestly took like 20 min to install both sides! Very easy all instructions and hardware included Sorry my bad just copied the link at the beginning of the thread. They don't make a power folding or power telescoping. just std...
  19. king_yukon

    Feels sluggish but no proof

    How might one go about doing that?
  20. king_yukon

    I want my Truck to sound like it has a 5.7

    Ive got 21/2" cat back duals with new cats, and no mufflers. and it screams. my buddy has a 05 ram 1500 with straight pipes with no mufflers and mine is louder for sure! doesn't sound like a 350 sounds like a 454+
  21. king_yukon

    Feels sluggish but no proof

    Im curious to an answer for this issue, I have the samething by the sounds of it. I noticed it before I did any of the following. plugs, wires, cap, rotor, spider injectors, cats, custom exhaust, fuel filter, water pump and coolant flush. I can feel a light almost stumble in the engine...
  22. king_yukon

    Tbar Lift with block

    Well the lift springs take care of the back, now the stock keys can only be turned to lift 2" right? If I change the keys, Im guessing they would be larger? Will I beable to lift beyond the 2" markk? To help even out the rake from the rear lift springs Thanks btw all the info so far has been...
  23. king_yukon

    towing mirrors

    Thanks guys! Good to hear they are liked! EBAY! actually the link mentioned above... mine are power mirrors, they are foldable and extend out to 21" from door to far side of mirror. They have ones with turn signals and what not but honestly I just dont really care for them IMO. Just...
  24. king_yukon

    towing mirrors

    I dont care what anyone thinks. I love em! Cant wait to get it lifted so it looks a little more proportioned
  25. king_yukon

    Tbar Lift with block

    So i've looked into the lift springs. Thats the way i'm going to go for sure. Now that ones i'm looking at say 4" will it settle at 4 or sag a little bit lower to like 3? anyone know?

Forum statistics

Threads
132,005
Posts
1,860,741
Members
96,410
Latest member
meow

Latest posts

Top