Search results

  1. M

    2013 NAV Disc read error (on DVD try)

    Just bought a 2013 Suburban with NAV. Put a DVD in and it tries to read it. 1 in 10 DVDs will work. The others throw a cannot read disc error and eject it. Any thoughts? I am going to try a lens cleaner as a first step.
  2. M

    Groan, grinding sound/feel, load at 1800ish RPM

    Thanks for the update. I will take a look for anything that seems out of place. So far I have replaced the exhaust hangers (which I think you are referring to here), trans and engine mounts and front hub bearings. All of this has helped reduced the amount of noise and vibration but it still...
  3. M

    20's on a 2500

    I know the newer HD trucks have the option of 20's but they have a redesigned wheel well compared to my 2011 Yukon XL 2500. Can anyone tell me the biggest tire I can fit on a 20" rim in there? Current is 265/70/17. I think a 265/60/20 fits, but wondering if I can go wider with the same 60...
  4. M

    rough idle/vibration

    Bringing this up again as I am still chasing it down. I have new motor and trans mounts and front hub bearing going in this week. If this doesn't solve it I am at a loss. Jumping ahead, but the vibration goes away if I put it in neutral and if in gear and brake torque it I can get the...
  5. M

    weatherstrip around door frame

    $38 each is cheap - who was the seller? Cheapest I am seeing them is $65. So is the floor trim cover the only piece that needs to be removed and the rest of the seal just fits in or does around the fuse panel (drivers side) need to be separated somehow?
  6. M

    weatherstrip around door frame

    I am referring to the weatherstrip that is in the door opening, not on the actual door. Any tips or tricks to replacing it? Mine is torn from feet sliding across them when getting in/out. Is it glued on or just fits in a track?
  7. M

    motor mount part number

    Thanks very much! And a few $ cheaper than where I was looking.... weird - I can't click through the vehicles and get to the diagram and option for the 4WD trans mount in your URL...
  8. M

    motor mount part number

    On the 2011 2500 are the two motor mounts the same part? 25828247? Also I have a thread going about a vibration issue that but a worn mount symptom could be excessive vibration and not just a clunk?
  9. M

    Groan, grinding sound/feel, load at 1800ish RPM

    Bringing this back up as it is still not solved. Since my last post, the front diff was rebuilt, changed plugs and wires and replaced rear u-joint but it made no difference. 2 dealers (went for second opinion) say the drive train is fine and both suggest motor mounts (Visual inspection they...
  10. M

    Yukon Wood Grain Match

    How did you get the radio bezel off? Also I have an 11 Yukon 2500 - is that center console possible with mine? Mine is all exposed - not sure if 1500 were different.
  11. M

    AWD (old truck) vs 4WD (new truck)

    To answer the question of why would I put it in 4 Auto when conditions don't necessarily call for it? A couple reasons - 1) to see if putting it Auto is working properly or just going right to 4WD regardless of what the dial says it is in. 2) My understanding of Auto is that you can leave it...
  12. M

    AWD (old truck) vs 4WD (new truck)

    Thanks for the replies. So driving on a dry road today, I put it in 4 Auto and I feel a clunk and then feel additional feedback in my feet. Goes away if I switch back to 2WD, and seems to go in/out when in auto. Seems like auto is always going to 4WD? I assume the additional feedback in...
  13. M

    exposed material

    They should be turned 90*
  14. M

    exposed material

    Here are some pics as to what I am talking about.
  15. M

    AWD (old truck) vs 4WD (new truck)

    Thanks for the reply. For a recent example - today driving in the snow in 4 auto, I was on a side street and felt it engaged on the ice/snow. Then while getting the main road which was still wet but not slick, I still felt a vibration like something was engaged and turning (not turning corner...
  16. M

    material in fender/door jam

    Sorry to have 2 posts going on same topic - but what is a closeout panel? Why is it a substance that is going to retain moisture?
  17. M

    exposed material

    It is not in or on the door at all, when the door is open, you can see it in the fenders. I will try and get a picture ASAP.
  18. M

    AWD (old truck) vs 4WD (new truck)

    Hi all - I came out of an Escalade ESV (05 Platinum) to a 2011 Yukon XL 2500. Is 4 auto the same as AWD? When I am in 4Auto I can feel it engage and works when in snow, etc. But when it is not slick or anything, it still feels engaged - should it feel like its back in 2WD when not really...
  19. M

    exposed material

    I put this in exterior, buy not really sure where it should live. Hello - This question is in relation to a 2011 Yukon XL 2500; but I am sure it applies to all of these body styles. I bought the truck used so it is new to me. When I open the front doors I notice there is a piece of felt...
  20. M

    material in fender/door jam

    Hello - This question is in relation to a 2011 Yukon XL 2500; but I am sure it applies to all of these body styles. I bought the truck used so it is new to me. When I open the front doors I notice there is a piece of felt looking material (about 1/4" think, grey, sound deadening?). It looks...
  21. M

    exhaust drone - please explain

    I've asked before with no response and keep searching to no end. Can someone explain exhaust drone to me? At around 1800 RPM in any gear the exhaust harmonics get louder, like in a tin can, and I feel a slight vibration throughout the vehicle. Is that drone or potentially something else...
  22. M

    Groan, grinding sound/feel, load at 1800ish RPM

    No I have not figured out what it is yet. It is in any gear at roughly 1800 rpm. Sound in the cabin gets louder and I feel it in the floor and steering wheel. I'm trying to ignore it... but would rather have it fixed or know if it's normal.
  23. M

    Groan, grinding sound/feel, load at 1800ish RPM

    it was 2WD and sounds the same in 4WD. I'm new to the sounds/feel of this system. I came out of a AWD Escalade. In 2WD there is still something spinning in the front diff right? OK - now the weird thing. I only have 50 miles since I've done this, but I took my K&N out and cleaned MAF sensor...
  24. M

    Groan, grinding sound/feel, load at 1800ish RPM

    I stopped by a local drivetrain shop and they took her for a test spin. They said it could be the start to the carrier bearing, but want more time with it. I'm going to pull my TT with it a couple times in the coming months to see if it gets worse. Please let me know any thoughts you have...
  25. M

    Groan, grinding sound/feel, load at 1800ish RPM

    Hi - I have a previous post about this, but I asked about 2 issues in previous post and want to separate this out. 2011 Yukon XL 2500. 85k miles. At any speed (and any gear) around 1800 RPM I hear a loud wwwhhhaaaaa (if you can imagine that) and feel it in the chassis (floorboard), but...

Forum statistics

Threads
132,258
Posts
1,864,912
Members
96,815
Latest member
Maisie14

Latest posts

Top