Search results

  1. W

    HVAC issue, blower doesn't work at all

    As stated the temperature will change when you command it to. And you can select floor/dash/defrost. Only thing that won't work is the blower itself.
  2. W

    HVAC issue, blower doesn't work at all

    Anyone have any ideas here?
  3. W

    HVAC issue, blower doesn't work at all

    So my 2003 Yukon Denali sat for a while with a dead battery. I finally decided to replace it. After that neither front or rear blower motors worked. The a/c would cycle if you moved the temperature control knob and if you were driving down the road with recirculation off the air from driving...
  4. W

    Front and rear blower motors not working

    Yeah that's what I didn't understand, they both lost power at exactly the same time. But you can select between heat and air. If the fresh air is on the air will come out the vents but the blower motor isn't actually turning. I can't find much information out about anything. I've got Mitchell...
  5. W

    Front and rear blower motors not working

    2003 Denali XL. Automatic climate control. Neither front or rear blower motors are working. They have both quit at the same time. I checked the 10 and 30 amp fuse in the driver fuse box for the hvac and they are not blown. The display works as it should and so does the compressor and actuators...
  6. W

    Anyone done side exit exhaust?

    Not sure if it is helpful or not but I have a side dump exhaust on my NBS Denali. I moved the muffler forward, it' almost under the front passenger seat. The exhaust is about 3/4 the way back on the rear door. It is pretty loud and has drone on the highway. Been that way for 2 years and no...
  7. W

    Let's see Your Before and After pics

    Ohh, yeah I still have those. With everything that I had going on i didn't even put them on this year. I kept my winter wheels on.
  8. W

    Let's see Your Before and After pics

    Yeah I've been busy working on the house. I never had TBSS wheels, I'd love to have a set. And yeah I'm going to paint it Ford's Tuxedo Black. I need to update my build thread
  9. W

    Let's see Your Before and After pics

    Before after and current state.
  10. W

    Help with no start

    So I got the tank and pump back out and I had a broke wire right at the edge of the connector. Got it back together and running now. Thanks for pointing me in the right direction.
  11. W

    Help with no start

    I used a walbro 255. The in tank part was in good shape but I'm not to sure about the harness on the truck side. I'm getting ready to drop the tank
  12. W

    Help with no start

    My fuel pump originally had went out. I changed my fuel filter and pump at the same time. I had less than 2 gallons of fuel to put in it here at the house, but I put it in and fired it up to make sure all was well before putting it all back together. After I got it all buttoned up I let it run...
  13. W

    Brake hose replacement

    Awesome. Thanks guys!
  14. W

    Brake hose replacement

    I wish those kits would work. Mine has 6 brake hoses. Both of those listed were for 5 if I read it right.
  15. W

    Brake hose replacement

    I'm looking to replace/upgrade my brake hoses to stainless braided. To the ones that have done this what brand or kit are you purchasing? I found some from stop tech but it was only the front lines.
  16. W

    My Build Thread

    Finally getting some time to work on this thing. Today I started stripping paint off and vinyl off the grill. I took the lower grill, tow hooks, and for lights out a while back. Getting ready for some paint finally.
  17. W

    My Build Thread

    It's been a little while since I posted anything. Definitely neglected the Denali but I hope to get some things fixed up on it soon. I'm wanting to change out my wheels this year, you guys have any recommendations? Still wanting to stick with 24's
  18. W

    6.0 Cold Air Is Way Too Loud At 75, How do you shut it up!

    Not enough to be noticed
  19. W

    My Build Thread

    I got my new headlights in the mail on Friday. Just finished cutting them apart to remove the amber. Just need to clean them up then I can put them back together and seal them up.
  20. W

    Denali XL towing

    Keep an eye on your trans temperature. Assuming the trailer has brakes?
  21. W

    My Build Thread

    I'm using the MagnaFlow 12298
  22. W

    My Build Thread

    I had already buffed them when I took them apart to remove the amber reflectors. They are still in real bad shape. The adjuster completely broke off on me about an hour ago so... LOL these war far from dropping in. But not to bad. I really like my MagnaFlow going into the stock tailpipe
  23. W

    My Build Thread

    Thanks dude I appreciate it. I do too, I can't wait to see it on the truck. Just finished throwing a set of morimoto mini 7.0 projectors in my Denali housings. My housings are in bad shape so I will be ordering another set and swap everything over.
  24. W

    My Build Thread

    I picked up my paint and supplies for the Denali yesterday. I wanted something different without being to flashy. So I decided on Ford's Tuxedo Black. I still need to get my rear vents covers and a few other odd and end pieces before I start doing prep work.
  25. W

    My Build Thread

    Yeah the center is stick on, but the outside I think is something similar to hydrodip.

Forum statistics

Threads
132,332
Posts
1,866,201
Members
96,957
Latest member
beka1283

Latest posts

Top