Search results

  1. J

    Testing the water: FS/T 2013 Tahoe PPV

    I lowered my 2011 PPV 2 and 2. Much rougher ride now but it looks good.
  2. J

    2023 PPV

    Did you look in the glovebox?
  3. J

    Can you train a new remote fob w/o DIC

    Batteries+ plugged into my Tahoe and programmed a new fob.
  4. J

    Maybe help clear up several questions about PPV;s

    How do you know if you still have the PPV program?
  5. J

    Recommendations for suspension setup / wheel&tires (for off-road) **2012 Tahoe SSV**

    It’s needs to go lower for that police look. I did 2 and 2.
  6. J

    Add DIC to SSV ?

    99 is real when you’re going downhill with your foot off the accelerator. I get 14.7 average also but I get 20 mpg at 80 mph.
  7. J

    My 2010 PPV

    I’m in Palm City Florida. Where are you located?
  8. J

    VIN description

    One of the RPO codes in the glove compartment is PPV or SSV. My 2011 two wheel drive is probably similar. No spotlight, no police paint job, civilian console, no cage in back. It had small red/blue lights inside the front and back and rear side windows. All hidden until they were turned on. Deep...
  9. J

    Useless Information

    The manufacturer has already done the research on tire pressure and put it on the drivers door entrance. This number will give you the optimal mileage.
  10. J

    Useless Information

    I would think only a dealer or a thieve would be able to reset engine hours.
  11. J

    Useless Information

    I get 20 mpg at 80 mph.
  12. J

    Just got a tahoe ppv. What do you recommend for shock absorbers?

    I lowered my 2011 2 and 2 with DMJ suspension parts. Then I replaced the back shocks with shorter DMJ shocks to compensate for the lowering. Ride is pretty harsh now especially on the back shocks. Did I do something wrong?
  13. J

    2014 Tahoe PPV

    So if you give your garage the vin number they should be able to find the correct parts for your vehicle?
  14. J

    PPV Front and Rear Coil Spring Replacement

    I replaced mine with a Heilwig. It was a solid bar instead of a tube and it had a larger diameter.
  15. J

    New Owner 2014 PPV from VA

    It’s a little stiffer than before.
  16. J

    New Owner 2014 PPV from VA

    Heilwig sway bar, lowered 2 inches front and back with coil springs and then needed shorter shocks for the back. DIC switch and new back bumper with receiver for towing. It was an Orange County (Orlando) Florida undercover model so no spotlight or external lights only hidden internal lights that...
  17. J

    New Owner 2014 PPV from VA

    Looks like my 2011
  18. J

    PPV Front and Rear Coil Spring Replacement

    I got 2 inch drop for front and rear from DJM. The front dropped 2 inches but the rear only dropped 1/4 inch so I talked to them and they said I need the 4 inch drop for the rear because it is a PPV. That dropped it about two inches. Also put on a Heilwig front sway bar. The OEM is a hollow tube...
  19. J

    Build Log: Down8's Tahoe Has a Nickname

    Why do you have to reboot the PC?
  20. J

    07-14 Tahoe PPV Suspension

    Thanks for all that great information. I have a 2011 PPV which I believe to be a detective or supervisor model because it doesn’t have any outside lights or decals. It does have the PPV code in the glove compartment. I had at the same time a 2008 PPV which was definitely a phoenix police cruiser...
  21. J

    DSM lowering kit didn’t lower the back. I got a 2 and 2 inch lowering kit for my 2011 Tahoe.

    Front dropped about 2 inches. Rear only dropped 1/4 inch. I called them and told them it is a PPV. They said that because PPVs are already lowered that I should have ordered a 4 inch lowering to get 2 inches of drop. Does this sound right?
  22. J

    My 2010 PPV

    High 300s everywhere I look.
  23. J

    My 2010 PPV

    LQK, the largest junkyard in the United States didn’t have a single one anywhere in the US. Unbelievable.
  24. J

    My 2010 PPV

    What does hardwired V1 mean? There is discussion on here about heavy duty aftermarket sway bar. Lots of people said it is a huge improvement. My brakes were pulsing so my shop turned the rotor’s down instead of replacing with new. I thought garage’s didn’t do that anymore but they said if there...
  25. J

    My 2010 PPV

    Where did you find the oem hitch and how much did you pay for it? 400+ seems like a lot to pay for a used piece of steel on EBAY.

Forum statistics

Threads
132,866
Posts
1,875,774
Members
97,772
Latest member
gseling

Latest posts

Top