03 how rear lower than front w/ body lift???

[Smoke Em All]

So my truck had a 3"body lift when I bought it. I'm not sure if something wasn't done correctly or if it's just how these are when lifted. The rear seems to be lower than the front and I have no idea what to do or how it can be fixed. Because of this issue the steering seems a little loose. It's not bad but annoying. I'm guessing it's just because of the poor weight distribution due to the rearward lean. If anybody knows what can be done chime in please I'd be very grateful. I'll attach a pic where you can clearly see what I'm referring to.

Sent from my HTC One_M8 using Tapatalk

 

[chrisreed822]

Check your torsion bars, you can probably back off those enough to level it out.


Sent from my iPhone using Tapatalk

 

[yates ™]

Front is maxed out (cranked)

 

[Smoke Em All]

Thanks guys.
I had a feeling it may have something to do with that. I'm not familiar with how these work any body have a link or description?

Sent from my HTC One_M8 using Tapatalk

 

[yates ™]

A link to a body lift?

 

[Smoke Em All]

No how to adjust the torsion bars.

Sent from my HTC One_M8 using Tapatalk

 

[yates ™]

Just get under there and crank em down. Make sure you do them equally.

 

[chrisreed822]

It takes an 18mm socket, loosen them to lower the front end and tighten them to raise it, pretty simple.

 

[Smoke Em All]

It takes an 18mm socket, loosen them to lower the front end and tighten them to raise it, pretty simple.

Thanks man I will try that and see if I can even it out.

Sent from my HTC One_M8 using Tapatalk

 

[TxDrewski]

Yeah its the T Bars. I have a 3" B.L. on mine and it still has the same factory rake from back to front.