03 tahoe sql build

[dblover1327]

Well I havent touched shit in my car for 3 years and the system was never completed. So I got pissed and decided to rebuilt it due to having some time finally so I might be rusty on some fiberglassing etc. Not going for spl but an sql car. It will consist of all sundown amps (sundown 3000, 100.4, 50.4), all lowmids from eton and vifa, midrange all tangband or dayton( still deciding) and finally tweets will be all vifa radiator tweets, alpine 9887 ( will be replaced with rockford threesixty.4 or audison bitone, will have motorized ipad(or android tablet), 2 powermaster d3100, and motorized sub amp rack. This build will be very slow do to the fact I have little time in the week to work on it and waiting for my work to pay me. So here is the start of it.
So did the basic wiring and ran my mogami signal wire (got 12channels but using 8)

ac heater taken out same with headunit

a pillar wiring


Start of the relocation of ac/heater control relocation

The idea



Fiberglassed

Put plastic filler

God done sanding it and testing the fit, like the way it looks

tomorrow I will primer it and hopefully get it wired up and all
So here is my apillar idea, it will house 2 4 inch mids on each side along with a tweeter but idk if i will keep it or just redo the a pillar again


I ran all the wiring but didn't take any pics
thats all for today but will get the primer on the bezel and start on the mid high amp rack tomorrow

---------- Post added at 03:43 AM ---------- Previous post was at 02:13 AM ----------

no going back now

 

[dblover1327]

So got started on the doors. Basically front doors will have 2 eton lpg 6 1/2 sealed and in the rear dayton 5 1/4 with a vifa xt tweet. Here it the process, I basically cut the pannel and fiberglassed it so it can be removable.







glassed with 1 coat

applying another coat of fiberglass


Well gonna redo the amp rack, here is the old template I had

Start of new amp rack


---------- Post added at 01:39 AM ---------- Previous post was at 12:27 AM ----------

Test Fitting all molds

 

[1Agerry]

wow! that looks awesome man! great job.

 

[ebxgsxr]

sweet! i love what you did with the console. want to do mine

 

[dblover1327]

Here more pics of the amp rack. I gonna try to order the plexi soon for the amps and just got the led in







---------- Post added at 11:29 PM ---------- Previous post was at 11:26 PM ----------

wow! that looks awesome man! great job.

Appreciate it bro

sweet! i love what you did with the console. want to do mine

lol. appreciate

 

[dblover1327]

Little Update
Redid the door pods and this is how they will look
got all the screw glued in


Idea for mounting


wrapped

Test Fit


Tomorrow will start on fiberglassing
Got a couple things in the mail today

 

[tRidiot]

Strong work

I did something similar in mine, but without the relocation of the controls.

I agree wholeheartedly with the door build - what people don't realize about these trucks is how damn hard it is to get get midbass sound out of these doors! They are impossible to seal properly due to the mounting system of the doorpanels, and IME, "free-air" midbasses just don't have the punch I'm looking for in the lower midbass range.

After 4 rebuilds on my doors alone, I currently have a CDT M6+ in each door. They each have their own sealed fiberglass enclosure mounted behind the doorpanels and inner doorskin. Lots of cutting needed for this mod, but it was well worth it. I may swap back out to my Exodus Anarchy midbasses. Originally had tweets up on the A-pillars, but I tossed those and now am running Image Dynamics HLCDs. A pair of TC-Sounds TC-9 12s in the back complete my drivers. 3 alts, 2 batteries and around 5kw of power. Using a Sundown 3500d for the subs and a pair of Phoenix Gold Xenon X200.4s for up-front duty (bridged for 400W x 4 channels).

Stealth was my main concern outside of sound, so that's why I did my doors the way I did. Considering a major door rebuild, however. This would include a 10" sub and dual 6.5" mids in each door. Problem is finding someone I trust to do it.

Good job, keep us posted!

 

[coolchuck]

Thats good stuff. You said slow build. Thats a good amount of progress. keep it up!

 

[Huck]

Nice, which head unit are you going with?

 

[dblover1327]

I did something similar in mine, but without the relocation of the controls.

I agree wholeheartedly with the door build - what people don't realize about these trucks is how damn hard it is to get get midbass sound out of these doors! They are impossible to seal properly due to the mounting system of the doorpanels, and IME, "free-air" midbasses just don't have the punch I'm looking for in the lower midbass range.

After 4 rebuilds on my doors alone, I currently have a CDT M6+ in each door. They each have their own sealed fiberglass enclosure mounted behind the doorpanels and inner doorskin. Lots of cutting needed for this mod, but it was well worth it. I may swap back out to my Exodus Anarchy midbasses. Originally had tweets up on the A-pillars, but I tossed those and now am running Image Dynamics HLCDs. A pair of TC-Sounds TC-9 12s in the back complete my drivers. 3 alts, 2 batteries and around 5kw of power. Using a Sundown 3500d for the subs and a pair of Phoenix Gold Xenon X200.4s for up-front duty (bridged for 400W x 4 channels).

Stealth was my main concern outside of sound, so that's why I did my doors the way I did. Considering a major door rebuild, however. This would include a 10" sub and dual 6.5" mids in each door. Problem is finding someone I trust to do it.

Good job, keep us posted!

I couldn't agree with you more. I did freeair the eton before and sounded horrible. I was so mad that I decided to rebuilt it LOL. I am gonna have to modify the doors more and the fiberglass template I made. People don't understand when you put a ton a speakers in the door, you need the proper enclosure for it to sound good and free airing is not the proper way( good example pa speakers in the car). Its not big enough for the cubic feet needed but if I get pissed, I will just get some 8inch midbasses for the doors and call it a day. Got pics of your buid btw?

Thats good stuff. You said slow build. Thats a good amount of progress. keep it up!

Thanks bro!

Nice, which head unit are you going with?

Alpine 9887 for now but switching to rockford 360.4 with optical going to the tablet

---------- Post added at 05:54 AM ---------- Previous post was at 05:53 AM ----------

Here is an update on the car









So got to fiberglassing all the panels so here are some pics.
rings for a pillar





ready for glassing


coat of resin

Drying

Gonna sand and add body filler tomorrow
All Dried and cut all the exta fiberglass of and openings