07 13 Chevy Tahoe GMC Yukon 2WD 4WD 2" Drop lowering Spindles | eBay

[redeknightjr]

Does anyone have experience or opinion on these? http://m.ebay.com/itm/291672215833

1SG Retired

 

[justinesky]

I was looking at those too. I got springs now but i wouldnt mind going a little lower

 

[redeknightjr]

I was looking at those too. I got springs now but i wouldnt mind going a little lower

View attachment 64742

Clean ride brother! Which springs do you have and where did you get them from

1SG Retired

 

[isellpower]

I've got a set, but haven't installed them yet. They shipped them fast and they came with that sticky coating on them wrapped in plastic. They appear to be decent pieces. I was going to put them on soon, but after reading the issues some folks are having with the rear setup I'm waiting a while.

 

[AZSCTACO]

Made in China........

 

[OneTwo]

I typically advise people to stay away from eBay parts, but I think the quality has improved quite a bit in recent years.

Either way, the spindle is a VERY simple part. There are really only two potential issues I could see happening:

1) The fitment is off slightly.
2) Sub-par metal and/or casting could bend or break if enough force were applied (pothole, curb, etc.)

I think #1 is far more likely than #2.

 

[redeknightjr]

I typically advise people to stay away from eBay parts, but I think the quality has improved quite a bit in recent years.

Either way, the spindle is a VERY simple part. There are really only two potential issues I could see happening:

1) The fitment is off slightly.
2) Sub-par metal and/or casting could bend or break if enough force were applied (pothole, curb, etc.)

I think #1 is far more likely than #2.

Thanks for the information

1SG Retired

 

[redeknightjr]

I had some 2" drop spindles from spindle source on my last tahoe, they worked perfectly. Everything else was from Tony at Norcall....t

1SG Retired

 

[NASTY GM]

I have the following I want to sell. PM me if your interested.
Belltech 2" drop spindles (black powder coated)
Belltech up to 2" adjustable struts (chromed)
DJM control arms 2" drop I believe (black powder coated)

I also have Eibach swaybars and rear stuff

 

[redeknightjr]

I have the following I want to sell. PM me if your interested.
Belltech 2" drop spindles (black powder coated)
Belltech up to 2" adjustable struts (chromed)
DJM control arms 2" drop I believe (black powder coated)

I also have Eibach swaybars and rear stuff

PM sent.....are the spindles for 07 tahoe

1SG Retired