'08 Front Inner Fender Liner Push Pins?

[EddieC]

Here’s the OEM that Rocket Man mentioned...

https://www.gmpartsdirect.com/v-2008-chevrolet-tahoe--ls--5-3l-v8-gas/body--fender-and-components

I got a set of cheap ones on Amazon, but each time I go and remove them they break. I’ll probably try the site Rocket Man suggested once all of mine break.

Look at all those pin numbers on that GM diagram.

As far as the cheap ones, all of my original GM ones failed on removal but then it might be due to 12 years of exposure.

 

[Rocket Man]

Help Section? Never saw such a thing here.
Having briefly looked on line there seem to be a myriad of diameters and lengths for both types. That is the hurdle.

Just buy the ones I showed you from clipsandfasteners. That’s the only size of those you need, and takes care of 95% of what you need. The others are just the Christmas tree type and there’s only one or 2 sizes, they’re kind of forgiving and they go by hole diameter. This isn’t a difficult thing.

 

[PG01]

Help Section? Never saw such a thing here.
Having briefly looked on line there seem to be a myriad of diameters and lengths for both types. That is the hurdle.

I can pretty much guarantee your local auto parts store has the same display or a section in store like every auto parts store in America ive been in has, but order online...........its faster and easier to wait.

 

[Jason in DLH]

Here’s the cheap set I ordered from Amazon...



The good thing about this set is the variety and they hold well. But dang it...most of the tops peel right off when I try and relieve the pressure. I then need to drill them out.

Glad I remembered about this thread as my supply is running low and will be ordering the ones @Rocket Man suggested.

 

[EddieC]

"clipsandfasteners" did the trick without too much fuss.