16 Escalade 2/4.5 drop

[brucebruce45]

What do you mean when you say 2” strut cups? Did you also do the spindles?

No spindles. Here’s what I used
https://www.suspensionshop.com/chev...-1-2-drop-strut-spacers-mcgaughys-part-34061/

 

[Staggered 02]

Very nice!!! Looks great. What's next?

 

[adcs2k]

No spindles. Here’s what I used
https://www.suspensionshop.com/chev...-1-2-drop-strut-spacers-mcgaughys-part-34061/

Can’t believe that is just 2”. Looks like 3-4” up front. Looks good.

 

[adcs2k]

No spindles. Here’s what I used
https://www.suspensionshop.com/chev...-1-2-drop-strut-spacers-mcgaughys-part-34061/

So I went back through your posts and I saw you did 3” springs first. I’m trying to figure out if you used springs and those spacers to get that low in the front? I understand the rear.

 

[brucebruce45]

So I went back through your posts and I saw you did 3” springs first. I’m trying to figure out if you used springs and those spacers to get that low in the front? I understand the rear.

Only thing the front has is those 2” cups. Originally I only installed 3” springs on the rear and left the front stock.

 

[olyelr]

Looks really good but what the hell is up with the headlights and fog lights on the Escalades?

Did you just crawl out from underneath a rock?

 

[crazycrew]

Damn, those struts cups makes it look super low. Looks great Bruce

 

[brucebruce45]

Damn, those struts cups makes it look super low. Looks great Bruce

I think it looks so low bc these tires are so damn big. The stock 285/45s are a touch over 32” tall. Got some 285/35s coming

 

[Dearmosd]

I didnt think the drop spacers worked on MRC front suspension

 

[1sikryd]

I think it looks so low bc these tires are so damn big. The stock 285/45s are a touch over 32” tall. Got some 285/35s coming

Must be the camera angle and lighting. Looks lower than mine with the same drop components