16 suburban ditch light brackets?

[Jnull]

Does anyone make ditch light brackets for these vehicles? Even hood hinge brackets would be fine. I have a pair of SDHQ fender mount ditch light brackets for my wife’s 16 Sierra 1500 but we traded it on the suburban and these brackets don’t fit.

Auxiliary lighting mounted that high makes a substantial difference in output. I have a pair of Baja designs XL80s with spot lenses on ditch brackets for my mega cab and they really aren’t far off my 40” baja Designs ONX6 hi power that’s mounted a couple feet lower. The XL80 pair is 19k lumens compared to the 44,600 lumens the ONX6 puts out.

 

[Jnull]

No one?

 

[STORMIN08]

http://www.kdfabworks.com/2015-2019-TahoeSuburban_c_232.html

these are about the closet i have seen...but you sound like you want a higher location

 

[Jnull]

Yea those aren’t ditch lights lol. Ditch lights are on the A pillars

 

[Sparksalot]

I looked for a year for my 2011. I finally found some on Amazon. Kind of a smh moment, and they were a whopping $20.

 

[Jnull]

I looked for a year for my 2011. I finally found some on Amazon. Kind of a smh moment, and they were a whopping $20.

Would you be able to post a link? We’re they hood hinge mounted?

 

[Sparksalot]

Here are the ones I bought. I found them because someone gave me a link for a set he put on his 06. Turns out it was a easy search after that.

https://www.amazon.com/GS-Power-windshield-Compatible-2007-2013/dp/B088QGWBL8

 

[Jnull]

@Sparksalot for the win. I never search Amazon for this kind of stuff because their search engine sucks and usually brings up parts for every vehicle but the one you searched but I found one company that makes then for the 15+ platform. They’re certainly not SDHQ but I don’t need them to hold an XL80 either.

They have a bolt on tab the light mounts to, I’m assuming those have to be removed to open the hood otherwise theirs no need for them. That kind of sucks but it’s livable.

https://apocindustries.com/products/2014-16-chevy-tahoe-suburban-ditch-light-brackets

 

[Sparksalot]

@Sparksalot for the win. I never search Amazon for this kind of stuff because their search engine sucks and usually brings up parts for every vehicle but the one you searched but I found one company that makes then for the 15+ platform. They’re certainly not SDHQ but I don’t need them to hold an XL80 either.

They have a bolt on tab the light mounts to, I’m assuming those have to be removed to open the hood otherwise theirs no need for them. That kind of sucks but it’s livable.

https://apocindustries.com/products/2014-16-chevy-tahoe-suburban-ditch-light-brackets

Mine actually sit far enough back the hoods opens as normal.

 

[Jnull]

Mine actually sit far enough back the hoods opens as normal.

maybe that’s the case with these and I can just tig weld the end bracket on