16 Tahoe Grease fittings.

[LT1ZOB]

Those who DIY their maintenance, how often should I be greasing these suspension fittings? I use Lucas products on my trailer wheels. Do you guys have specific grease recommendations? Thanks

 

[dbbd1]

OEM fittings? Prob with every oil change. Aftermarket suspension parts? Prob once a year or so.

 

[swathdiver]

What grease fittings? I bought a fancy lucas grease gun and the red-n-tacky and crawled underneath expecting to go to town and... 2 fittings! 2 lousy fittings on the tie rod ends, everything else is sealed. Of course I can pull the driveshafts and make sure the yokes have synthetic grease on them but that is it!

So Bob, come on over and grease your tie rods, if I don't share it, that tube will probably outlast me!

 

[LT1ZOB]

Thanks guys, yes I’m talking about just the 2 tie rod ends.

 

[Bob2C]

What grease fittings? I bought a fancy lucas grease gun and the red-n-tacky and crawled underneath expecting to go to town and... 2 fittings! 2 lousy fittings on the tie rod ends, everything else is sealed. Of course I can pull the driveshafts and make sure the yokes have synthetic grease on them but that is it!

So Bob, come on over and grease your tie rods, if I don't share it, that tube will probably outlast me!

yeah seriously. Why bother with the 2. I was expecting a few more. Like you sad, grease will outlast us. Lol

 

[OR VietVet]

Every oil change or at least 2 times a year, IMO. Grease helps them last longer.

 

[Bob2C]

I have been doing them every other oil change. My OIC is 3 to 3500 miles


Sent from my iPhone using Tapatalk

 

[2006Tahoe2WD]

Do the zerk fittings on my 2006 have a "standard" thread? I think one of my fittings is clogged and needs to be replaced.

 

[OR VietVet]

I personally never saw a difference in zerk threads for the GM products but am sure they may well be a difference.

 

[2006Tahoe2WD]

I'm going to guess the thread is 1/8" tapered. I could pull one and find out. I also got remined that the fitting on the gun can be tightened and loosened to get the connection and have it not slip off when pumping in the grease.