2” rear lowering spring

[95escahoe]

I have a set of belltech rear drop springs for sale if anyone is looking for a set.

What size drop? And do you have the shock extenders?


Sent from my iPhone using Tapatalk

 

[BADRIDES]

What size drop? And do you have the shock extenders?

2-4 inch drop and no shock extenders, just springs.

 

[Tamcphail89]

How much for the springs?

 

[Jaytizzle]

Deleted

 

[JasonLmarsh]

What brand and model were those 3" springs and shocks?

Well I started with an ebay 2/3 kit labeled MaxTrac that included shocks. I don't recall the name on the shocks though. At first I had forgotten to cut the bump stops, so it rode extremely rough and bouncy. I went back in and cut 1/2 off with a big ride improvement but still not good. I went back again and removed the entire bump stop and it still rode really rough. So I replaced the springs with Belltech 3" springs (with 1" spacer) so they were a 2" drop and it still rode extremely stiff (worse than my friends F350). I suppose now it could have been the shocks.... I sold that truck and drove something different for a few months, but now I'm back in a Yukon Denali again, so I'm hoping to learn from those mistakes. This time I'm keeping the original shocks and air system and going with the Eibach springs. Wish me luck...

 

[JasonLmarsh]

Any link to these springs?


Sent from my iPhone using Tapatalk

Eibach 3882.520
https://www.amazon.com/gp/product/B000BW8PGI/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

 

[BADRIDES]

How much for the springs?

$125 shipped

 

[Tamcphail89]

Did you ever decide on what you're going with?

 

[01ssreda4]

Ive got belltechs and new 4600s and they are too soft to carry any load. I ended up adding airlift helper bags and a compressor.

 

[95escahoe]

Did you ever decide on what you're going with?

Most likely the Crown 2” rear springs and maybe a 2/4 drop down the road


Sent from my iPhone using Tapatalk