2” Rear Lowering Springs “Reverse” Level

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

gat0r

Full Access Member
Joined
Dec 11, 2015
Posts
3,107
Reaction score
5,831
Location
DFW

Staggered 02

Full Access Member
Joined
Jul 5, 2019
Posts
651
Reaction score
1,460
A little off topic—but how do you like the Spohn trailing arms?


Spohn Trailing arms are great. Installed the lowers and the Panhard bar. I was unable to install the upper due to the ride height sensor. Customer service and communication were great. One of these days when time and schedule permit I"ll figure out a way to attach the ride sensor brackets to the Spohn uppers.
 

Matt0213

TYF Newbie
Joined
Mar 10, 2021
Posts
4
Reaction score
1
I know this is an old thread, but how much did yours settle? I just installed the mcgaughys 2” p/n 30014 today. It is already about 1/16” lower in the back.
05A7423C-E024-4AF1-BE3B-4D2DB8A84612.jpeg C91824C6-CF89-4DB0-9524-39FF529A581C.jpeg
 
OP
OP
M

mb1500

Full Access Member
Joined
Jan 22, 2019
Posts
330
Reaction score
308
You might want to play with the auto ride rods if equipped, I think I was somewhere around 1/2” to 3/4” higher in the rear.
 

Matt0213

TYF Newbie
Joined
Mar 10, 2021
Posts
4
Reaction score
1
You might want to play with the auto ride rods if equipped, I think I was somewhere around 1/2” to 3/4” higher in the rear.
Mine is the non auto ride. I just swapped out the 18” rims for 22s.
 

Matt0213

TYF Newbie
Joined
Mar 10, 2021
Posts
4
Reaction score
1
Really sharp with the 22’s and 2” drop, bet it looks like a whole new truck.

Thanks. It really does. I’m just wondering how much it’s going to settle down in the back. If it goes down much I’ll either need a spacer or will have to lower the front.
upload_2021-3-11_5-52-18.jpeg
E03E65B0-D152-41DD-8F15-41A482167066.jpeg
 

Forum statistics

Threads
132,234
Posts
1,864,456
Members
96,781
Latest member
Ykn11Cg
Top