2-3/4 Drop Photos from Under RearEnd Please

[WingsAA]

Wanted to see if any of you that have installed this kit from Tony could share a photo or two of the underneath of the rear end? My parking brake cables seem to be a bit snug against sway bar end links on the one side and the shock on the other side. I'm curious if anyone else has this or relocated the lines te remedy this.

Thanks in advance!

 

[hbr]

Mine were tight too.......no issues. Go Bucks!!!

PS- some pics here http://tahoeyukonforum.com/forum/showthread.php?t=42588

 

[Goodinblack]

First set are pictures of my rearend.......well my truck's anyway.

 

[WingsAA]

Mine are WAY tighter. The driver's side is mostly touching the lower portion of the shock... about two or three inches below the air bag on the autoride shock. The passenger side is touching on the sway bar end link.

 

[VTburban]

Yeah Brian mine are tighter too...check this out...

[/IMG]

This was taken a couple months ago, no problems since then. I haven't re-routed, but should something fail to work 100% I think I'll look into it.

 

[sumo]

yea same here

 

[WingsAA]

Yeah Brian mine are tighter too...check this out...

[/IMG]

This was taken a couple months ago, no problems since then. I haven't re-routed, but should something fail to work 100% I think I'll look into it.

I've had a couple cases of the parking brake light come on but at the same time had the service stabilitrack/service traction control message too. Then today, got the tighten gas cap message then parking brake light and dinger as well as the above messages again. the brake light guess off after a few seconds but have to turn off the truck and restart to get the others to go away.

I initially thought the cables might be getting pulled on when cornering hard as that's when it seemed to happen. After getting the "loose gas cap" message today I have no clue. Guess I'll be going to the dealer and hook up the old tech II. My luck, the body control module took a crap... Ugh.

I'll get some pics of how my cables are now this Friday once I'm back home.

 

[VTburban]

Fingers crossed, man.

 

[Modded]

Yeah Brian mine are tighter too...check this out...

[/IMG]

This was taken a couple months ago, no problems since then. I haven't re-routed, but should something fail to work 100% I think I'll look into it.

From that pic I can tell you live up North.
As for the OP, mine used to touch with stock shocks. Now that I have shorter Bilstein shocks, it does not.

 

[WingsAA]

Fingers crossed, man.

Thanks dude!

At this point, I'd almost welcome them saying "yep, that's it.... You're all set." But guessing it will be "we can't seem to get it to do it."