2/3 vs 2/4 drop?

[Bass911]

I'm sitting at 34 1/8" in the front and 36 1/8" in the back on factory 16s. I'm assuming it would be better to do a 2/3 drop on 26s because I think the back would sit lower than the front with a 2/4 drop? Is this correct?

 

[Bruizza]

It would be damn close to lower if not lower. I dropped mine 2/3 on 26s and it is damn near level. I would think an extra inch in the rear would make the rear sit lower.

 

[robstor]

Yeah but I depends on the torsion bars. You can make the difference up with a little adjusting of the torsion keys.


Sent from my Lumia 710 using Tapatalk

 

[NORCAL SS]

I'm sitting at 34 1/8" in the front and 36 1/8" in the back on factory 16s. I'm assuming it would be better to do a 2/3 drop on 26s because I think the back would sit lower than the front with a 2/4 drop? Is this correct?

This depends on what spings gm used in rear (some sit lower /higher) In front can vary where the torsion keys are put.

If you do 26s i would do the 295 30 26 and this drop kit
http://www.tbssowners.com/store/index.php?act=viewProd&productId=86


295 30 26
26x10 with 30mm offset

Any questions just ask.

Tony

 

[Bass911]

This depends on what spings gm used in rear (some sit lower /higher) In front can vary where the torsion keys are put.

If you do 26s i would do the 295 30 26 and this drop kit
http://www.tbssowners.com/store/index.php?act=viewProd&productId=86


295 30 26
26x10 with 30mm offset

Any questions just ask.

Tony

I guess 2/3 is what I'm going with. How do you get 30mm offset with u2-55 rims?

 

[NORCAL SS]

I guess 2/3 is what I'm going with. How do you get 30mm offset with u2-55 rims?

shoudl be OFFSET avil