2000 NBS Blue Steel Burban Build

[00'BlueSteel]

Dont like it, go back to other side of lot...

I was sitting in there looking at the other spot where I always park in before I left and it felt like I was cheating on it, lol.

 

[00'BlueSteel]

Went to work super early today was able to get good full night pics of the gauges and headlight output.

These show the white bleed through on the trim rings, is that how this cluster are suppose to be? I’m thinking about taking it out and blacking out the back of the silver trim rings cause I hate the light coming through. And does anyone have advise on what less to put in this thing to get even lighting?

 

[00'BlueSteel]

JDM 3030 switchbacks
JDM 3030 DRLs
Kensun 35w 6k HIDs in low beam
Auxbeam F-S3 hi beams

This is one set of the JDM Astar 3030 switchbacks. They’re really bright!

Not sure why the HiDs look greenish in the photos? It’s pure white in person.
Low beam hids at 5 feet


Low beam hids at 15 feet


Low beam hids driving

Hi beam leds

 

[PG01]

Went to work super early today was able to get good full night pics of the gauges and headlight output.

These show the white bleed through on the trim rings, is that how this cluster are suppose to be? I’m thinking about taking it out and blacking out the back of the silver trim rings cause I hate the light coming through. And does anyone have advise on what less to put in this thing to get even lighting? View attachment 204399View attachment 204400 View attachment 204401

Shouldn’t drive with your ebrake on.... not good....smh....

 

[crafty333]

That's been my next upgrade. Also considering just smoking or tinting the lenses. It's low priority on my list, but it really does make a killer difference.

 

[00'BlueSteel]

Shouldn’t drive with your ebrake on.... not good....smh....

Lol one of those picture was taken with me outside of the truck, and I can’t run that fast.....

 

[00'BlueSteel]

That's been my next upgrade. Also considering just smoking or tinting the lenses. It's low priority on my list, but it really does make a killer difference. View attachment 204412 View attachment 204413

What are you on about mate?

 

[00'BlueSteel]

1.25” spacers for the front came in today

 

[HiHoeSilver]

1.25” spacers for the front came in today View attachment 204858

You gonna be trimming some studs then, I take it? Maybe you are qualified for @yates ™ position.

 

[00'BlueSteel]

You gonna be trimming some studs then, I take it? Maybe you are qualified for @yates ™ position.

You cheeky devil you.





And hopefully no trimming required. Classic IIIs have the recesses on the back, measured them before hand, 0.6” depth so with 1.25” spacers we are at 1.85” of clearance for the studs.