2003 Chevrolet Tahoe Stabilitrak/Traction Control Question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Kenstang

TYF Newbie
Joined
Jan 7, 2014
Posts
1
Reaction score
0
This may sound like a ridiculous question, but I was wondering if anyone knew if it was possible to add the stability control to a model that did not originally come with it.

For example, I just recently acquired a 2WD 5.3L, but I was hoping that it was a possibility to add the Traction Control Module and other necessary components in lieu of having the 4WD equipped model.

If anyone can shed some light on the possibility it would be greatly appreciated!
 

mattluttrell

Full Access Member
Joined
Feb 4, 2014
Posts
203
Reaction score
11
I have this on my Escalade and end up turning it off sometimes.

Do you want it so that it makes your tires spin less on ice? Does it do something else I'm not aware of? (Like computer controlled braking to simulated a locker as on an FJ)
 

Duramax05blk

Full Access Member
Joined
Jul 8, 2012
Posts
338
Reaction score
223
Location
NH
Can be done. easily nope. Ben from btdieselworks.com has successfully added It to his duramax. Not sure of the exact details just that he did do it. Even displays on the dic when activated.


Sent from my iPhone using Tapatalk. Excuse my grammar the iPhone makes me iStupid!
 

Time2Kill

Full Access Member
Joined
Jan 31, 2013
Posts
140
Reaction score
5
It would require a new EBCM (the ABS block on frame rail), the ABS Precharge motor, new master cylinder, all the correct brake lines (two into the block, 4 out to each wheel), the stablitrak module in the rear quarter panel, and all the supported wiring. Once all that is done, you have to find a dealer or someone with a Tech 2 that is willing to sort out all of the programming/flashing between the EBCM, Stabilitrak module, and I assume BCM.
 
Last edited:

Yukongk

Full Access Member
Joined
Apr 14, 2013
Posts
776
Reaction score
10
Location
NY
This may sound like a ridiculous question, but I was wondering if anyone knew if it was possible to add the stability control to a model that did not originally come with it.

For example, I just recently acquired a 2WD 5.3L, but I was hoping that it was a possibility to add the Traction Control Module and other necessary components in lieu of having the 4WD equipped model.

If anyone can shed some light on the possibility it would be greatly appreciated!

What are you trying to achieve? Do you simply want a vehicle that will be less susceptible to getting stuck in certain weather/terrain conditions or do you actually want a stability control system?
 

Forum statistics

Threads
132,760
Posts
1,873,763
Members
97,592
Latest member
shadowid60
Top