2003 Yukon Remote Starter Help

[timm]

Hi,

I have recently bought a crimestopper Cool Start RS-4 remote car system. I am looking to hook it up but was wondering if anyone could point me in the direction of where to find a wiring diagram for my 2003 Yukon. Thanks!

 

[Riff Raff]

http://www.the12volt.com/installbay/forum_posts.asp~TID~28666

http://www.the12volt.com/installbay/forum_posts.asp~TID~6903

ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|red & red/white |+ |ignition harness |
| STARTER|yellow |+ |ignition harness |
| IGNITION|pink |+ |ignition harness |
| SECOND IGNITION|white |+ |ignition harness |
| ACCESSORY|orange |+ |ignition harness |
| SECOND ACCESSORY|brown |+ |ignition harness |
| POWER LOCK|white *3 |- |switch on right rear panel |
| POWER UNLOCK|lt. blue *3 |- |switch on right rear panel |
| LOCK MOTOR|gray | |driver door module in door |
| UNLOCK MOTOR|tan | |driver door module in door |
| DISARM DEFEAT|tan | |driver rear door harness |
| PARKING LIGHTS +|brown | |driver kick panel |
| PARKING LIGHTS -|gray/black | |headlight switch |
| HEADLIGHTS|pink or white |- |headlight switch |
| DOOR TRIGGER|*1 |- |*1 |
| DOME SUPERVISION|comes on with disarm| | |
| TRUNK/HATCH PIN|pink/black |- |harness to BCM *2 |
| HOOD PIN| | | |
|TRNK/HTCH RELEASE| | | |
| FCTRY ALARM ARM| | | |
|FCTRY ALRM DISARM|lt. green |- |driver door module in door |
| TACHOMETER|NOT pink | |any fuel injector |
| SPEED SENSE| | | |
| BRAKE WIRE|white |+ |brake pedal switch |
| HORN TRIGGER|black or blk/yel |- |column or gray plug @ BCM *2|
| WIPERS| | | |
| LF WINDOW UP/DN|blue - brown |A |LF window switch in door |
| RF WINDOW UP/DN|lt. blue - tan |A |RF window switch in door |
| LR WINDOW UP/DN|blue - brown |A |LR window switch in door |
| RR WINDOW UP/DN|blue - brown |A |RR window switch in door |

 

[groundscr8pr]

you are goin to need a bypass module for the pass lock,locks,and alarm disarm. i would use a fortin intsl with the crimestopper. there have been some issues using idatalink with crimestopper. fortin seems to be more reliable with that brand.

 

[Soma1975]

remote start

Looking at a BULLDOG myself.

Paul

 

[timm]

Thanks for all of the information everyone! I did purchase the bypass module too.

---------- Post added at 12:05 AM ---------- Previous post was Yesterday at 11:55 PM ----------

you are goin to need a bypass module for the pass lock,locks,and alarm disarm. i would use a fortin intsl with the crimestopper. there have been some issues using idatalink with crimestopper. fortin seems to be more reliable with that brand.

Ground,

I hate to be a pest, but would you know exactly which bypass module I would need? i thought I had a bypass module but it is a relay. 03 Denali

thanks!