Dantheman1540
Full Access Member
Decided it was time to do plugs since I never did them when I bought it. I did pull a couple when I bought it and they looked good. However recently I've noticed an occasional misfire or stumble at low rpm high load situations such as rolling a stop in third gear at like 3-5mph. Yes I should just downshift but this thing makes so much torque it usually doesn't mind.
Anyway pulled plugs and found one with crack porcelain and one MSD wire corroded terribly on the coil pack side.
Also while doing the passenger side I dropped a socket and had to crawl under the truck. Suddenly I noticed 2 of the passenger side crossmember bolts were extremely loose. Went ahead and checked a bunch of other stuff all was well.
Anyway pulled plugs and found one with crack porcelain and one MSD wire corroded terribly on the coil pack side.
Also while doing the passenger side I dropped a socket and had to crawl under the truck. Suddenly I noticed 2 of the passenger side crossmember bolts were extremely loose. Went ahead and checked a bunch of other stuff all was well.