2004 6.0 NV4500 Tahoe

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Dantheman1540

Dantheman1540

Full Access Member
Joined
Feb 13, 2020
Posts
4,856
Reaction score
10,502
Location
Sugar Loaf Mountain
Fugly and functional V2 is compete with a turnout/back. I also redid the driver side mid pipe and cut out the V band to convert to slip fit which was a PITA. Haven’t cutout the passenger side V band yet but honestly not sure I will for a long time, I’m beyond sick of exhaust work in this thing. I am amazed how tough this double muffler combo sounds under WOT. Not loud by any means but you can tell it’s a tough V8 when you hit 60% throttle and nearly silent at idle.

Some of the welds look like doodoobutter deluxe because I don’t have a tungsten sharpener at home but I did my best with burnt tips.
 

Attachments

  • D5B31499-828B-47BF-BF0A-31E74673014D.jpeg
    D5B31499-828B-47BF-BF0A-31E74673014D.jpeg
    568.4 KB · Views: 6
  • F7ECEFE0-52F2-445C-828C-D0D9D6FA7447.jpeg
    F7ECEFE0-52F2-445C-828C-D0D9D6FA7447.jpeg
    310.5 KB · Views: 6
OP
OP
Dantheman1540

Dantheman1540

Full Access Member
Joined
Feb 13, 2020
Posts
4,856
Reaction score
10,502
Location
Sugar Loaf Mountain
Took a several hour trip in this thing a week ago, used the hitch as a battering ram to move giant oaks logs, and now have it loaded up to take ye ole golf cart to a firework show tomorrow.

Been working on the tune a little more and it’s getting better and better. Not that it was awful but still had some flare up during rolling idles which was annoying. One bad thing is I think my G80 is quitting on me finally. It worked fine in the dirt a few weeks back but it’s been raining for a few days straight and 4/5 times I dump the clutch it doesn’t want to lock. Found trutrac a appear to have dropped $200-300 in price so I’m considering that. Or, do I hummer H2 rear locker swap it? It would mean I’d have to buy a spare hummer axle, gut it, drill a hole in my current axle housing to run the wires through, and put the 3.42s onto the Elocker. Would be a lot of work but cheaper than the truetrac and e lockers are neat.
 

Attachments

  • F994C6AE-24BD-4CC8-B8CF-B167B40D6E0E.jpeg
    F994C6AE-24BD-4CC8-B8CF-B167B40D6E0E.jpeg
    631.5 KB · Views: 3
  • 75C34EE4-3420-45EF-9918-A3A5BCD2B614.jpeg
    75C34EE4-3420-45EF-9918-A3A5BCD2B614.jpeg
    785 KB · Views: 3
  • F1B62C2A-2D71-468B-966A-34948F29E661.png
    F1B62C2A-2D71-468B-966A-34948F29E661.png
    571.5 KB · Views: 3

Forum statistics

Threads
132,324
Posts
1,866,004
Members
96,920
Latest member
BLS9
Top