2004 6.0 NV4500 Tahoe

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Dantheman1540

Dantheman1540

Full Access Member
Joined
Feb 13, 2020
Posts
4,856
Reaction score
10,502
Location
Sugar Loaf Mountain
Had a cool new feature pop up in the Tahoe today. I was driving and suddenly the motor shut off and would not start back. It was either cutting fuel or spark. I pulled over and checked codes, it had none, so I tried starting it again and off it went like nothing ever happened.
 

iamdub

Full Access Member
Joined
Apr 23, 2016
Posts
20,821
Reaction score
44,945
Location
Li'l Weezyana
Had a cool new feature pop up in the Tahoe today. I was driving and suddenly the motor shut off and would not start back. It was either cutting fuel or spark. I pulled over and checked codes, it had none, so I tried starting it again and off it went like nothing ever happened.

Ignition switch or its wiring going bad? With the trans conversion, it could be any related wiring or connections at fault.
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,004
Reaction score
50,862
Location
Oregon
You really think that’s it? Hit 285k as well.
Still original ignition switch? I replaced mine at 170k just because. I figured it would fail at a bad time. Like there’s a good time for your ignition switch to fail. But if you have a lot of keys on the key ring, that’s been known to cause issues also, especially with GM ignition switches or don’t you remember.
 
OP
OP
Dantheman1540

Dantheman1540

Full Access Member
Joined
Feb 13, 2020
Posts
4,856
Reaction score
10,502
Location
Sugar Loaf Mountain
Still original ignition switch? I replaced mine at 170k just because. I figured it would fail at a bad time. Like there’s a good time for your ignition switch to fail. But if you have a lot of keys on the key ring, that’s been known to cause issues also, especially with GM ignition switches or don’t you remember.

I have a considerable amount of crap on my keys so I wouldn’t be surprised but I was honestly thinking it was a cam or crank sensor issue again. Hadn’t really ever seen someone have an ignition switch issue.
 
OP
OP
Dantheman1540

Dantheman1540

Full Access Member
Joined
Feb 13, 2020
Posts
4,856
Reaction score
10,502
Location
Sugar Loaf Mountain
Did fine today when the Safelite guy told me he couldn’t replace the windshield in the ranger because the glue was harder than a ministers cac. Threw the ranger on the trailer and hauled it across green mountain to their shop. If I get that rearend from @randeez I might put 3.73s in it with a trutrac. The 3.42s are good but a tiny bit more gear would help this thing in 3rd gear trying to climb with a load at 35mph. Could down shift but seconds kinda too low to hold for a long period of time.
 

Attachments

  • 1BE4A15D-B348-4E3A-8DCE-E183DF5117AF.jpeg
    1BE4A15D-B348-4E3A-8DCE-E183DF5117AF.jpeg
    534.1 KB · Views: 4
  • 89B3CA85-C44E-4D17-AF2E-1E91D9105FB3.jpeg
    89B3CA85-C44E-4D17-AF2E-1E91D9105FB3.jpeg
    442.5 KB · Views: 3

pwtr02ss

Full Access Member
Joined
Apr 1, 2013
Posts
11,772
Reaction score
25,286
Location
Tennessee
Did fine today when the Safelite guy told me he couldn’t replace the windshield in the ranger because the glue was harder than a ministers cac. Threw the ranger on the trailer and hauled it across green mountain to their shop. If I get that rearend from @randeez I might put 3.73s in it with a trutrac. The 3.42s are good but a tiny bit more gear would help this thing in 3rd gear trying to climb with a load at 35mph. Could down shift but seconds kinda too low to hold for a long period of time.
@randeez wouldn't offer his reared to just anyone so you better take it....and be easy on it.
 

Forum statistics

Threads
132,369
Posts
1,866,883
Members
96,996
Latest member
Brynedic

Latest posts

Top