2004 Tahoe interior overhaul

[tooleyondeck]

Not hard, just a pita--especially when you're trying to lay it out without any wrinkles.

well luckily i’m doing a single cab for now, looking at the XL i can tell that’ll have to be extremely patient… which i often struggle with

 

[jagblazer01]

Some quick updates. Got the rest of the interior torn out this weekend. This stuff is disgusting. The previous owner did not take care of it at all. Next step is sound deadener and speaker wiring.

 

[Roilux]

How's it coming? Any progress? For minor scratches I use a heat gun. Works pretty good.

I'd not thought of using a heat gun to touch up panel scratches. What do you use to impart a similar texture? That's if it's needed.

 

[Roilux]

Some quick updates. Got the rest of the interior torn out this weekend. This stuff is disgusting. The previous owner did not take care of it at all. Next step is sound deadener and speaker wiring. View attachment 429303

Seeing (almost) bare floors reminds me of my 'to-do' list of installing an access hatch to the fuel pump. Because, one day ............

 

[Tonyrodz]

I'd not thought of using a heat gun to touch up panel scratches. What do you use to impart a similar texture? That's if it's needed.

I use to have my own automotive interior repair business. I had these rubber flexible patches, they were the size of your average bathroom wall tile--they had different grain patterns on them. That's what I used. When I made the suggestion I was thinking of very small minor scratches or scuffs, nothing deep. For the small scratches you want to use the lowest setting of the heat gun--don't hold it too close to the plastic panel, and just use the heat on it ever so lightly--you don't want to melt the panel. As you get practice you'll get a feel for it. I hope I explained it clearly. Sometimes I don't explain things very well.

 

[Roilux]

I use to have my own automotive interior repair business. I had these rubber flexible patches, they were the size of your average bathroom wall tile--they had different grain patterns on them. That's what I used. When I made the suggestion I was thinking of very small minor scratches or scuffs, nothing deep. For the small scratches you want to use the lowest setting of the heat gun--don't hold it too close to the plastic panel, and just use the heat on it ever so lightly--you don't want to melt the panel. As you get practice you'll get a feel for it. I hope I explained it clearly. Sometimes I don't explain things very well.

Cool. You've confirmed how I thought the process would go. Thanks man.

 

[jagblazer01]

Well i know it's been a while but I finally got the interior back together. It's going in next week to have the seats upholstery done. In the mean time, I had to have the cluster rebuilt due to a parasitic draw it was causing.

 

[Tonyrodz]

Well i know it's been a while but I finally got the interior back together. It's going in next week to have the seats upholstery done. In the mean time, I had to have the cluster rebuilt due to a parasitic draw it was causing.View attachment 444065

What's the plan with the seats? Anything special, or stock recover?

 

[jagblazer01]

What's the plan with the seats? Anything special, or stock recover?

Going with full leather from www.leatherseats.com

 

[jagblazer01]

Updates!!!!