BacknBlack
TYF Newbie
- Joined
- Aug 6, 2012
- Posts
- 15
- Reaction score
- 0
Hey Guys,
New to the site and I was looking for some input on a couple of issues that came up on a recent trip.
I had been having the "long cranking before engine starts" problem for the last month or so. I figured it was the check valve in the fuel pump getting bad. To combat this, I would turn the key partially forward and let the pump purge the fuel line back up with gasoline to the motor before I would turn the key all of the way forward to start it. In 80 degree weather in NW Iowa, this was working. I took a trip to Tulsa last week and it was 100 degrees plus for the 4 days we were there. No matter what I tried, the engine would crank over quite a while before the car would start. Sometimes the starter would kick out and I would have to turn it over again to get it to fire. Now that we are back in 80 degree weather, it is still doing the same thing it did in Tulsa last week.
My thougt is that the fuel pump was/is getting weak, and the excess temps and pressure it endured while in Tulsa has taxed the pump enought where it is need of replacement. Thoughts? Am I on the right path, has someone had this issue? Is it solely the check valve in the pump? I put on 1200 miles during the trip, and it ran absolutely fine once it was started and running. It ran well, even with the temps in rush hour traffic down there.
Anotehr issue I had was the stabilitrak warning. This occured while driving down the road at highway speeds. I think this alarm is due to the voltage levels fluctuating. When I got the alarm, the battery gauge was reading less than 14 volts. I would guess it was closer to 12 volts. After more driving, the guage bounced straight back up to 14 volts and the alarm cleared. Before the trip, I replaced the battery with a new AC Delco battery. I have not checked for loose wiring yet, but was going to tonight. I was also wondering if anyone had this problem and if the altenator ended up being the culprit?
This is a 2007 Yukon XL with 74k miles. This engine was rebuilt under warranty by a GM Dealer for the oil consumption which these 5.3 liter engines are notorious for.
Thanks in advance for any feedback!
Travis
New to the site and I was looking for some input on a couple of issues that came up on a recent trip.
I had been having the "long cranking before engine starts" problem for the last month or so. I figured it was the check valve in the fuel pump getting bad. To combat this, I would turn the key partially forward and let the pump purge the fuel line back up with gasoline to the motor before I would turn the key all of the way forward to start it. In 80 degree weather in NW Iowa, this was working. I took a trip to Tulsa last week and it was 100 degrees plus for the 4 days we were there. No matter what I tried, the engine would crank over quite a while before the car would start. Sometimes the starter would kick out and I would have to turn it over again to get it to fire. Now that we are back in 80 degree weather, it is still doing the same thing it did in Tulsa last week.
My thougt is that the fuel pump was/is getting weak, and the excess temps and pressure it endured while in Tulsa has taxed the pump enought where it is need of replacement. Thoughts? Am I on the right path, has someone had this issue? Is it solely the check valve in the pump? I put on 1200 miles during the trip, and it ran absolutely fine once it was started and running. It ran well, even with the temps in rush hour traffic down there.
Anotehr issue I had was the stabilitrak warning. This occured while driving down the road at highway speeds. I think this alarm is due to the voltage levels fluctuating. When I got the alarm, the battery gauge was reading less than 14 volts. I would guess it was closer to 12 volts. After more driving, the guage bounced straight back up to 14 volts and the alarm cleared. Before the trip, I replaced the battery with a new AC Delco battery. I have not checked for loose wiring yet, but was going to tonight. I was also wondering if anyone had this problem and if the altenator ended up being the culprit?
This is a 2007 Yukon XL with 74k miles. This engine was rebuilt under warranty by a GM Dealer for the oil consumption which these 5.3 liter engines are notorious for.
Thanks in advance for any feedback!
Travis